include &lt;bits/stdc++.h&gt;

5 years ago, # ^ |

+48

I'll post my solutions after the round ends.

→ Reply

EAGLESONG

5 years ago, # ^ |

where will You post It ?

→ Reply

5 years ago, # ^ |

As a CF Blog.

→ Reply

hetp111

5 years ago, # ^ |

Atcoder should pay you for this...

→ Reply

5 years ago, # ^ |

← Rev. 2 →

In F, i take input of the interval as pairs and sorted the vector of pairs ,then find the median of that interval. Then do the necessary arithmetic as pointed out by Geothermal in here. This approrach fails in few test cases. What's wrong with my approach with F? Can anyone point out what am i missing? Link of my submission

→ Reply

5 years ago, # ^ |

+14

I believe that for the $$$n$$$ even case, you select the wrong two indices to form the median. Use $$$\frac{n-1}{2}$$$ and $$$\frac{n}{2}$$$, rather than $$$\frac{n}{2}$$$ and $$$\frac{n+1}{2}.$$$

→ Reply

5 years ago, # ^ |

Your suggesstion did help to pass some test cases which were not passing earlier, but still few test cases are failing. Can't think of counter test case which could Hack my code.submission

→ Reply

Mike_tourist

5 years ago, # ^ |

You don't need to sort vector of pairs. Simply sort individually.

→ Reply

5 years ago, # ^ |

I know from the editorial but the problem is that I don't understand why my solution is wrong?

→ Reply

Mike_tourist

5 years ago, # ^ |

Your solution is wrong because you have sorted vector of pairs. Let these be pairs. 1 5 2 3 After sorting either they will remain same or 2 3 1 5 There is no possible way answer will be wrong in both the cases because for finding median array needs to be sorted.

→ Reply

rax_coder

5 years ago, # |

I hope it would be a great Contest

→ Reply

5 years ago, # |

← Rev. 3 →

Excited that I will learn something new!

Update: Learned when to use double when not to use doubles and how to use doubles!

→ Reply

gunjan10

5 years ago, # |

-80

2nd and the 3rd question seems easy but is really tricky... i dont know on which cases my code is getting wa...can anyone please help

→ Reply

ashok123

5 years ago, # ^ |

← Rev. 2 →

-24

its cheating bro!

→ Reply

NiwaP

5 years ago, # ^ |

-8

same problem lol

→ Reply

nihal_47

5 years ago, # ^ |

+12

Don't ruin the name of India more than already it is.

→ Reply

shubham_khanna

5 years ago, # ^ |

You don't need to look into name of india.

→ Reply

5 years ago, # |

← Rev. 2 →

-23

I'm so sad, it took me less time to D than it took me to do B and I haven't even done C. Everytime, I miss one of B-D. I'm cursed D:

→ Reply

Csk

5 years ago, # ^ |

-42

I am missing something in B and getting WA again and again. Any hints please!

→ Reply

5 years ago, # ^ |

← Rev. 2 →

+19

I'd love to help but I think that is not allowed (correct me if I'm wrong, I'm new to CP), will definitely help after the contest ends.

→ Reply

pattnayak_aa

5 years ago, # ^ |

Yes please man now

→ Reply

5 years ago, # ^ |

-10

so you have to realize anytime the answer overflows out of limit(of data type) or become > 10^18. also if there is even 1 0, ans = 0. Code:

include <bits/stdc++.h>

using namespace std;

typedef long long ll; typedef unsigned long long ull; typedef unsigned int uint; typedef long double ld;

int main() { ios_base::sync_with_stdio(false); cin.tie(0);

int n;
cin >> n;
ll t;
ld ans = 1;
for (int i = 0; i < n; i++)
{
    cin >> t;
    if (ans != -1)
       ans *= t;
    if (ans > 1000000000000000000 || ans < 0)
       ans = -1;
    if (t == 0)
       ans = 0;
}
cout << (ll)ans;
return 0;

}

→ Reply

kevin_mitnick

5 years ago, # ^ |

I had the same code, only difference was that i used long long for 'ans' instead of long double and i got WA on one of the test cases .Changed to long double and got AC.Why?

→ Reply

5 years ago, # ^ |

Because long long data type could be overflowing from the multiplication of say 10^12 and 10^12.

→ Reply

5 years ago, # ^ |

I solved problem C, and I don't even understand why it works.

→ Reply

lgswdn

5 years ago, # |

Will a CE submission be calculated into the overall penalty?

I submitted two pieces of codes in the wrong language and will my overall penalty increase by 10 min?

→ Reply

Meatherm

5 years ago, # ^ |

No.

→ Reply

dush1729

5 years ago, # |

How to solve F?

→ Reply

5 years ago, # ^ |

← Rev. 2 →

+12

For F, we can notice that ans is simply summation of i from 1 to n of (number of subsets of length i with sum s) * (2 ^ (n — i)).

So now let dp[x][j] = summation of i from to n of (number of subsets of length n with sum x) * (2 ^ (n — i)) for the prefix 1..j

Now, apply normal knapsack to combine answers, but since you're adding length 1 to your previous sums, we will have to divide them 2

dp[x][j] = dp[x][j — 1] + (dp[x — a[j]][j — 1] * modinv(2))

Answer is dp[s][n]

You can even do it in O(n) space without needing the second dimension, like a normal knapsack, moving backward.

→ Reply

Sahilamin219

5 years ago, # ^ |

← Rev. 2 →

Can you please provide the link for your solution madhav_1999

→ Reply

https://atcoder.jp/contests/abc169/submissions/13869671

5 years ago, # ^ |

→ Reply

Sahilamin219

5 years ago, # ^ |

← Rev. 2 →

Thanks you BTW you are my friend now.

→ Reply

5 years ago, # ^ |

→ Reply

5 years ago, # |

+21

Knapsack for All Segments vs Knapsack for All Subsets :D

→ Reply

towhid1zaman

5 years ago, # |

← Rev. 2 →

How to solve E!

→ Reply

guimafelipe

5 years ago, # ^ |

+10

If n is odd, get the maximum median (sort array of B's and get its median) and the minimum median (sort array of A's and get it's median). The answer is max median — min median +1.

If n is even, sort the arrays and do: max median = B[n/2] + B[(n/2)-1], min median = A[n/2] + A[(n/2)-1]. This way we avoid working with not integer numbers. So the answer is still max median — min median +1.

→ Reply

lemongrab

5 years ago, # ^ |

Oh god I was trying to use sweep type algorithm and check for each end point, but your answer is much much easier. Could not implement my approach but will try to refine it

→ Reply

AM_I_Learning

5 years ago, # ^ |

Thanks for your approach but can you prove it!

→ Reply

HP21

5 years ago, # ^ |

I am not able to understand why every value between min and max can be attained? Can you explain plz.

→ Reply

guimafelipe

5 years ago, # ^ |

From the minimum median, you just need to icrease the median by 1 to go to the next value (in case of n pair, increase first the biggest one and after the smaller one in the middle). You can do this until reach the maximum median.

→ Reply

dush1729

5 years ago, # ^ |

Thanks to 1358C, idea is very similar. You can observe minimum median will be median of array x and maximum medium will be median of array y.

So values in the range median of array x to median of array y will be covered. Take care when size of array is even.

Submission

→ Reply

TheNR

5 years ago, # |

In the second part, there are essentially two tricks for the problem 1) Sort the array. If the value at index i is 0, then we cannot return -1(no matter what). 2) Multiplying two extremely large numbers even when the data type is long long int will result in negative values, which will result in wrong answers. So, a*b>=c is equivalent to b>=(c/a)(take care of the border cases) Link to my code https://atcoder.jp/contests/abc169/submissions/13810433

→ Reply

TheNR

5 years ago, # |

Okay, so in the 3rd question, I simply multiplied a and b, and applied the floor function for the product. Link to my code in C++ https://atcoder.jp/contests/abc169/submissions/13814577

→ Reply

asipu_pawan

5 years ago, # ^ |

Submitting the same code, giving WA

→ Reply

5 years ago, # |

I just wonder how to solve B,C...

→ Reply

5 years ago, # ^ |

← Rev. 2 →

Is there anything wrong??? https://atcoder.jp/contests/abc169/submissions/13881928 https://atcoder.jp/contests/abc169/submissions/13872116

→ Reply

5 years ago, # ^ |

In problem C, there can be floating-point error.

→ Reply

5 years ago, # ^ |

But how to avoid??

→ Reply

lemongrab

5 years ago, # ^ |

I used string for storing $$$B$$$. Then calculated $$$100*B$$$. link

→ Reply

5 years ago, # ^ |

thank you!

→ Reply

5 years ago, # ^ |

+19

Use b=b*100+0.01;

instead of b*=100;

→ Reply

5 years ago, # ^ |

thank you!

→ Reply

Fireswan

3 years ago, # ^ |

Adding the extra 0.01 (or even 0.001) works, but how does it work? blobugh

→ Reply

3 years ago, # ^ |

If we convert double to long long, the fractional part would be discarded. So in this kind of problem, if we add small real number and convert it, we can see the same effect as rounding.

→ Reply

lunga

5 years ago, # ^ |

← Rev. 2 →

How will there be a floating point error? And how will b=b*100+0.01 save from it?

→ Reply

Utkarsh.25dec

5 years ago, # ^ |

In your solution for problem B, if resu is 10^17 and next number is 99 then it might overflow

→ Reply

5 years ago, # ^ |

Thank you !

→ Reply

5 years ago, # ^ |

← Rev. 3 →

+21

This is sarcasm..Right???

→ Reply

5 years ago, # ^ |

+11

NO NO NO!! I really don't solve them!

→ Reply

5 years ago, # ^ |

+13

You had a bad day don't worry

→ Reply

5 years ago, # ^ |

← Rev. 2 →

+40

. So sad :{

→ Reply

5 years ago, # ^ |

For B, just check 0 case. Then before multiplying with a[i], check if 1e18/a[i] < cur_product. If it is, simply print -1. Otherwise you can safely multiply.

→ Reply

hetp111

5 years ago, # ^ |

← Rev. 2 →

https://atcoder.jp/contests/abc169/submissions/13804989 I did the same... But getting WA in 2 TCs..

→ Reply

5 years ago, # ^ |

Typecast your 1e18 into int before dividing to avoid precision loss.

Changing to ans > (int)(1e18)/i should give you AC

→ Reply

5 years ago, # ^ |

Thank you !

→ Reply

Shubham2227

5 years ago, # |

i was getting TLE Second Question

→ Reply

5 years ago, # ^ |

I'm guessing you may have tried to multiply all the numbers together in Python or a similar language? Since the intermediate products can have $$$O(N)$$$ digits, multiplying them takes $$$O(N)$$$ time, so this approach takes $$$O(N^2)$$$ time in the worst case.

→ Reply

5 years ago, # |

+29

My solutions to all problems are at https://mirror.codeforces.com/blog/entry/78195.

→ Reply

primus7

5 years ago, # |

← Rev. 2 →

Can someone please tell why this fails for C?

n = input().split()
i1 = int(n[0])
i2 = int(float(n[1]) * 100.0)
i = i1 * i2
print(i // 100)

→ Reply

hahho

5 years ago, # ^ |

You need to round it, rather than taking its floor. For example float('2.51') = 2.509999999..., so int(float('2.51')*100) = 250.

→ Reply

primus7

5 years ago, # ^ |

thank you sir

→ Reply

hydro_lyte

5 years ago, # |

← Rev. 2 →

In C, why is math.trunc(a*b) in python giving WA,but in CPP, this is accepted-

ll a;
long double b;
cin>>a>>b;
ll ans;
ans=a*b;
cout<<ans;

→ Reply

Forward.

5 years ago, # |

← Rev. 2 →

nvm, got it

→ Reply

naman238

5 years ago, # |

-7

can anybody find mistake in my D solution.

#include<bits/stdc++.h>
using namespace std; 
bool ispower(int x,set<int> s)
{
	int f=0;
	int p=1;
	while(x%2==0)
	{
		p*=2;
		x=x/2;
		f=1;
	}
	if(x==1 && s.find(p)==s.end())return true;
	if(f==1)return false;
	int t=sqrt(x);
	for(int i=3;i<=t;i+=2)
	{
		int p=1;
		while(x%i==0)
		{
			f=1;
			x=x/i;
			p*=i;
		}
		if(f==1 && x==1 && s.find(p)==s.end())return true;
		if(f==1)return false;
	}
	return false;
}
bool isprime(int x)
{
	for(int i=2;i<=sqrt(x);i++)if(x%i==0)return false;
	return true;
}
int main()
{
	
	long long x;
	cin>>x;
	long long ans=0;
	int r=sqrt(x);
	set<int> s;
	bool seive[r+1];
	for(int i=2;i<=r;i++)seive[i]=true;
	for(int i=2;i<=r;i++)
	{
		if(seive[i])
		{
			for(int j=i;j<=r;j*=i)
			{
				if(x%j==0)
				{
					x=x/j;
					ans++;
					s.insert(j);
				}
			}
			for(int j=2*i;j<=r;j+=i)
			{
				seive[j]=false;
			}
		}
	}
	if(x>=2 && s.find(x)==s.end() && (ispower(x,s) || isprime(x)))ans++;
	cout<<ans;
	return 0;
}

→ Reply

primus7

5 years ago, # ^ |

← Rev. 2 →

You are not looking for primes greater than √x.

Try for 4000000028.

→ Reply

5 years ago, # |

← Rev. 3 →

Any care to explain why is this wrong for problem C ?


#define int long long 

void solve()
{
    int a,b;
    double c;
    
    cin >> a;
    cin >> c;
    
    b = (c*100);
    
    int res = (a*b);
    res/=100;
    
    cout << res;   
}

It gives WA for random_12.txt

Edit : I always define int as long long in my template.

→ Reply

5 years ago, # ^ |

+24

I'd guess the issue is double precision. Precision is an issue in general, but in particular, the answer here can be up to $$$10^{16}$$$, which is too large for the number of precision bits in a double.

→ Reply

5 years ago, # ^ |

But here multiplications are in long long, the only place where precision could affect is assigning "b = c*100".

→ Reply

5 years ago, # ^ |

+16

Ah, right; my bad--I misread the solution. The issue is precision in that conversion: I changed b = (c*100) to b = (c*100+0.5) and the solution was accepted.

→ Reply

5 years ago, # ^ |

Thanks for the solution.

Any advice on how to avoid these errors in future ?

→ Reply

5 years ago, # ^ |

+17

You need to understand why this error happened. The reason is that if you read a number as a double (lets say 10) the double can be represented as 9.9999... or maybe 10.000...01 (both of which are 10 indeed woth a very small error intrinsic to the floating point representation)) but in c++ if you convert them to an integer it truncates the value automaticaly, so the result could be either 9 or 10. The solution would be doing the comversion as x_int = round(x_double) or x_int = x_double + 0.5.

→ Reply

5 years ago, # ^ |

Thank you very much. This is what I was looking for.

Being skeptic, if x_double is 4.50 is there any chance I will get 5 instead 4 using your suggested solution ?

→ Reply

5 years ago, # ^ |

+11

Yes, it would be a problem. But you did not quite get how to use what I said. If a number has at most x decimal digits, you may want to multiply it to 10^x and convert to integer, so you do int_x = 10^x*double_x+0.5 (but if double_x has more the x digits this may not work correctly)

→ Reply

5 years ago, # ^ |

Now I got it. Thanks for the help.

→ Reply

5 years ago, # ^ |

Do not assume double arithmetic is correct. Often it is not, the result is only near to the mathematic correct result.

Deal with that or use integers.

→ Reply

5 years ago, # ^ |

I didn't, that's why I converted double to int and then calculated the result.

I am yet to find any solution which always works for doubles.

→ Reply

5 years ago, # ^ |

I disagree with that. You just need to unserstand how big the error can be in the worst case, often the error is smaller than 1, so you can often get the integer part right for sure if the constraints allow that

→ Reply

5 years ago, # ^ |

+13

That is the strategy I would call "deal with it".

→ Reply

tengiz05

5 years ago, # ^ |

Use long double instead of double

→ Reply

5 years ago, # ^ |

Why does long double over double changes anything ? considering value of is B < 10, having 2 digits are decimal point.

→ Reply

tengiz05

5 years ago, # ^ |

I used this formula: answer = floor( a * long double(b) )

→ Reply

5 years ago, # ^ |

Yes, that works well. I used the similar thing to get AC later. Thanks for the answer.

→ Reply

retr0coderxyz

5 years ago, # ^ |

Range of input is too big which will have precision loss. Try using long long and long double

→ Reply

5 years ago, # ^ |

Why does long double over double changes anything ? considering value of is B < 10, having 2 digits are decimal point.

→ Reply

TheNR

5 years ago, # |

In the fourth question, I simply used the Sieve of Eratosthenes to get the prime numbers less than 1e6, after that I iterate from 2 to the largest prime less than 1e6, and simply code out for the number of ways the number can be broken down! Just be careful when we multiply two numbers of digits 5 and 6! Link to my code- https://atcoder.jp/contests/abc169/submissions/13855795

→ Reply

hetp111

5 years ago, # |

Why this fails for problem B: https://atcoder.jp/contests/abc169/submissions/13804989

→ Reply

adarsh000321

5 years ago, # |

How to solve c? I multiplied a*b and took floor(a*b). What's wrong? submission

→ Reply

5 years ago, # ^ |

← Rev. 2 →

See, Double can store large values but on the cost of significant digits,in Long you will get more significant digits before decimal point but then you can not store digits after the decimal points

→ Reply

adarsh000321

5 years ago, # ^ |

But I also tried (long)(b*100)*a/100. What's wrong with this?

→ Reply

Atish508

5 years ago, # |

problem B solution : https://atcoder.jp/contests/abc169/submissions/13824612

→ Reply

ThakurSaab

5 years ago, # |

← Rev. 2 →

Please someone help me out with Problem C ....... My Submission

→ Reply

hydro_lyte

5 years ago, # ^ |

Precision issue. Do long long x = round(b*100) and AC

→ Reply

RiShAbHJain

5 years ago, # |

Whats wrong wit C

import java.math.BigDecimal; import java.util.Scanner;

public class Main {

public static void main(String args[])
{
    Scanner sc=new Scanner(System.in);
    long a=sc.nextLong();
    long b=(long)(sc.nextDouble()*100);
    long ans=(a*b)/100;
    System.out.println(ans);

}

→ Reply

5 years ago, # ^ |

← Rev. 2 →

My Simple and short Solution for C (Used Bigdecimal Library in JAVA)

void solve() throws Exception{
	BigDecimal bd1 = new BigDecimal(ns());
	BigDecimal bd2 = new BigDecimal(ns());
	bd1 = bd1.multiply(bd2); 
	pn(bd1.toString().split("\\.")[0]);
 
}

→ Reply

RiShAbHJain

5 years ago, # ^ |

You can do it this way but still whats wrong in my code.

→ Reply

icy_bird

5 years ago, # |

← Rev. 7 →

+19

I usually get one hit on both Codeforces and Atcoder, but this time seems horrible xD

→ Reply

5 years ago, # ^ |

Dude you are really patient!

→ Reply

RiShAbHJain

5 years ago, # |

Whats wrong in D

import java.util.Scanner;

public class Main {

public static void main(String args[])
{
    Scanner sc=new Scanner(System.in);
   long n=sc.nextLong();
   long copyn=n;
   long x=(long)Math.sqrt(n);
   long copyx=x;
   long ans=0;
   for(int i=2;i<=x;i++)
   {
       int count=1;
       while(n%((Math.pow(i,count)))==0)
       {

           n= (long) (n/Math.pow(i,count));
           count++;
           ans++;
       }

       while(n%(Math.pow(i,count))==0)
       {
           n= (long) (n/Math.pow(i,count));
       }
   }

   if(copyn==1)
   {
       System.out.println(0);
   }
   else

   if(n>x)
   {
       System.out.println(1+ans);
   }
   else
   {
       System.out.println(ans);
   }

}

}

→ Reply

AhmedRumi

5 years ago, # |

-15

What is the problem with this solution of C?Can someone help?

include<bits/stdc++.h>

using namespace std; typedef long long ll;

define mod 1000000007

int main() { ll a; float b1; cin>>a>>b1;
b1=b1*100; ll b=b1; ll s=a*b; s=s/100; printf("%lld\n",s); }

→ Reply

5 years ago, # ^ |

Maybe precision issues? Try doing b1 = round(b1*100)

→ Reply

AhmedRumi

5 years ago, # ^ |

Well, if the input is 1.890000 then it becomes 189.000000 and then 189 by typecast. There shouldn't be any problem.

→ Reply

https://atcoder.jp/contests/abc169/submissions/13900202 [WA] https://atcoder.jp/contests/abc169/submissions/13900438 [AC]

5 years ago, # ^ |

You dont understand how it works. The number may be interpreted as 188.99999999... which is the same as 189.00000 but when you cast to int in c++ the value is truncated, it sort of an undefined behaviour, the value may be casted to 188 or 189, use the round to avoid that.

→ Reply

AhmedRumi

5 years ago, # ^ |

Yeah, I got it. That was the problem actually. Thanks a lot.

→ Reply

shubham_khanna

5 years ago, # |

Both are identical solutions for problem B of AtCoder Beginner Contest 169. Does anyone knows why this happen?

→ Reply

shubham_khanna

5 years ago, # ^ |

-10

Maybe, someone playing with the testcases :)

→ Reply

Mucosolvan

5 years ago, # ^ |

Or maybe first solution is sent to Problem A not Problem B?

→ Reply

iynaur87

5 years ago, # |

I think I got a beautiful solution for F: the answer is just the coefficient of x^s in polynominal (2 + x^a1)(2 + x^a2)...(2 + x^an) here '^' is for power. we can just ignore higher order coefficient than x^s.

https://atcoder.jp/contests/abc169/submissions/13847100

please ignore unremoved code for problem D, E.

→ Reply

BRAINIAC77

5 years ago, # |

← Rev. 2 →

In B:
For the statement: if(inp[i] <= 1e18/ans) I got WA. But when i wrote : if(inp[i] <= 1000000000000000000/ans) I got AC. Is there any differences between 1e18 and 1000000000000000000?? Otherwise what is the reason??

→ Reply

madlogic

5 years ago, # ^ |

You should cast 1e18 to long long otherwise the result of the division becomes a float.

→ Reply

BRAINIAC77

5 years ago, # ^ |

Thanks man. That means 1e18 format is double type.

→ Reply

madlogic

5 years ago, # ^ |

Yup!

→ Reply

Theo830

5 years ago, # |

← Rev. 3 →

In editorial there is a typo in problem D English version.

Wrong:$$$O(N)$$$

Correct:$$$O(sqrt(N))$$$

→ Reply

Saksham_2000

5 years ago, # |

Can AnyBody please tell how can i reduce the submission time of my solution to the problem F?

https://atcoder.jp/contests/abc169/submissions/13920879

I have seen people getting AC in less than 100ms while mine is giving AC in 1000 ms.

thanks in advance. :).

→ Reply

thedonutguy

5 years ago, # |

In the editorial of problem F it says:

dp[i][j] = When the choices for the first i options is already determined, the number of combination such that the sum of ak for each k that the first option was chosen is equal to j

What does it even mean?

→ Reply

uggi121

5 years ago, # |

← Rev. 2 →

Can anyone help me debug my solution? I get TLE on 6-7 test cases, no idea why. Thank you!

#include <iostream>
#include <vector>
using namespace std;

int solve(long long n) {
    if (n == 1) {
        return 0;
    }
    vector<int> f;
    for (int i = 2; i * i <= n; i++) {
        while (n % i == 0) {
            f.push_back(i);
            n /= i;
        }
    }
    if (n > 1) f.push_back(n);

    int ans = 0;
    int i = 0;
    while (i < f.size()) {
        int j = i + 1;
        while (j < f.size() && f.at(j) == f.at(i)) j++;
        int count = j - i;
        i = j;
        int sum = 0;
        for (int x = 1; count >= sum + x; x++, ans++) sum += x;
    }
    return ans;
}

int main() {
    long long n;
    cin >> n;
    cout << solve(n) << endl;
}

→ Reply

madlogic

5 years ago, # ^ |

for (int i = 2; i * i <= n; i++)

i * i can overflow since n goes upto $$$10^{12}$$$
Use long long instead.

→ Reply

uggi121

5 years ago, # ^ |

T_T I don't know how I missed that. Thanks!

→ Reply

kartikey30

5 years ago, # |

what is my wrong with my code in problem-c? https://atcoder.jp/contests/abc169/submissions/13926562

→ Reply

nmnsharma007

5 years ago, # |

For problem D, Maybe this sounds stupid, But can someone please explain why is it optimal to compute for each prime and its powers first, then similarly with next prime and its powers, and so on instead of going from 2 onwards ?

→ Reply

iabhishek15

5 years ago, # ^ |

same thing I was also wondering .

→ Reply

mahabir10

5 years ago, # |

Can anyone provide any proof for problem-E for both odd and even case.

→ Reply

tribute_to_Ukraine_2022

5 years ago, # ^ |

If we increase one value by $$$1$$$ and leave the rest as it is, then median can stay the same or increase by $$$1$$$ for odd $$$n$$$ and stay the same or increase by \frac{1}{2}

Unable to parse markup [type=CF_MATHJAX]

is even. Now let's set $$$X_i = A_i$$$ and increase all of them one by one till we reach $$$X_i = B_i$$$. At first median equals median of $$$A_i$$$, and after all operations equals median of $$$B_i$$$ and at each step it will either stay the same or increase by $$$1$$$ in case of odd $$$n$$$ and by $$$\frac 12$$$ for even $$$n$$$ thus will reach all integers for odd $$$n$$$ and halfintegers for even $$$n$$$ from range $$$[\text{median}(A_1, \ldots, A_n), \text{median}(B_1, \ldots, B_n)]$$$.

To prove we can't reach any other value we only need to see, that median of an integer sequence is an integer for odd $$$n$$$ and a half integer for even $$$n$$$ and see that we can't reach a value outside that segment, but this is straightforward conclusion from the fact, that if all values increase or stay the same, then the median can only increase or stay the same as well.

→ Reply

walleeva

5 years ago, # |

If anyone is still stuck at D here is a Solution

→ Reply

mehedihassanshimul630

5 years ago, # |

I am Facing problems in the C . No matter what I submit , I am shown wrong answer in 6/22 cases . I am not understanding where is the error or fault exists in that code .. If anyone knows , please give me the solution . My code is given below ::::

include<stdio.h>

int main() { long long int a,pro1; double b,pro=1.0; scanf("%lld %lf",&a,&b); b=b*100; pro=(a*b); pro1=(long long int)(pro/100); printf("%lld",pro1); return 0; }

→ Reply

5 years ago, # ^ |

For big values of $$$a$$$ the variable $$$pro$$$ has simply not enough bits to store the exact result of $$$a*b$$$. In this case the double type truncates bits, which results in pro1 beeing some other value than the mathematecally expected one.

→ Reply

avenio99

5 years ago, # |

Can someone help me where I'm going wrong in problem D, I'm getting hand_22 as the only test case as WA. Here is my code https://atcoder.jp/contests/abc169/submissions/14102528 Thanks

→ Reply