By awoo, history, 4 years ago, translation, In English

Hello Codeforces!

On Sep/14/2020 17:35 (Moscow time) Educational Codeforces Round 95 (Rated for Div. 2) will start.

Series of Educational Rounds continue being held as Harbour.Space University initiative! You can read the details about the cooperation between Harbour.Space University and Codeforces in the blog post.

This round will be rated for the participants with rating lower than 2100. It will be held on extended ICPC rules. The penalty for each incorrect submission until the submission with a full solution is 10 minutes. After the end of the contest you will have 12 hours to hack any solution you want. You will have access to copy any solution and test it locally.

You will be given 6 or 7 problems and 2 hours to solve them.

The problems were invented and prepared by Roman Roms Glazov, Adilbek adedalic Dalabaev, Vladimir vovuh Petrov, Ivan BledDest Androsov, Maksim Neon Mescheryakov and me. Also huge thanks to Mike MikeMirzayanov Mirzayanov for great systems Polygon and Codeforces.

Good luck to all the participants!

Congratulations to the winners:

Rank Competitor Problems Solved Penalty
1 dzh_loves_mjy 7 204
2 neal 7 231
3 WZYYN 7 250
4 noimi 7 357
5 Um_nik 7 384

And finally people who were the first to solve each problem:

Problem Competitor Penalty
A Kirill22 0:01
B dzh_loves_mjy 0:04
C SSerxhs 0:05
D gleb.astashkin 0:17
E Pigbrain 0:19
F WZYYN 0:54
G OnlyG 0:16

UPD: Due to the issues with problems A and B the round is unrated.

UPD: Editorial is out

  • Vote: I like it
  • -544
  • Vote: I do not like it

| Write comment?
»
4 years ago, # |
Rev. 2   Vote: I like it 0 Vote: I do not like it

.

  • »
    »
    4 years ago, # ^ |
      Vote: I like it +14 Vote: I do not like it

    lol the rounds unrated. hope you get it next time tho!

    • »
      »
      »
      4 years ago, # ^ |
      Rev. 2   Vote: I like it +8 Vote: I do not like it

      .

      • »
        »
        »
        »
        4 years ago, # ^ |
          Vote: I like it 0 Vote: I do not like it

        even I had 1377 was hoping to go back to specialist ,had even solved two questions real quick but never mind

        • »
          »
          »
          »
          »
          4 years ago, # ^ |
            Vote: I like it 0 Vote: I do not like it

          Ohh, so you managed to solve A?

          • »
            »
            »
            »
            »
            »
            4 years ago, # ^ |
              Vote: I like it 0 Vote: I do not like it

            yeah xD knew my logic was right and when they corrected it I confirmed with given output and submitted

            • »
              »
              »
              »
              »
              »
              »
              4 years ago, # ^ |
                Vote: I like it 0 Vote: I do not like it

              can you explain the logic please?

              • »
                »
                »
                »
                »
                »
                »
                »
                4 years ago, # ^ |
                Rev. 2   Vote: I like it +8 Vote: I do not like it

                look at how many sticks there must be, from that you can convert some to coals to have at least $$$k$$$ sticks and $$$k$$$ coals.

                $$$\lceil{\frac{k+yk-1}{(x-1)}}\rceil+k$$$ is the answer

                • »
                  »
                  »
                  »
                  »
                  »
                  »
                  »
                  »
                  4 years ago, # ^ |
                  Rev. 2   Vote: I like it 0 Vote: I do not like it

                  t = int(input()) for i in range(t): x,y,k = [int(x) for x in input().split()] ans = (k*y) + k count=0 count = m.ceil((ans-1)/(x-1)) count += k print(count)

                  this is the ans i submitted, but i got wa

                • »
                  »
                  »
                  »
                  »
                  »
                  »
                  »
                  »
                  4 years ago, # ^ |
                    Vote: I like it +4 Vote: I do not like it

                  I had the same issue. I think the ceil function does not work properly for long long numbers.

                • »
                  »
                  »
                  »
                  »
                  »
                  »
                  »
                  »
                  4 years ago, # ^ |
                    Vote: I like it -38 Vote: I do not like it

                  include<bits/stdc++.h>

                  using namespace std; int main(){ long long int t; cin>>t; while(t--){ long long int x,y,k,c,d; cin>>x>>y>>k;

                  c=(k+y*k-x)/(x-1);
                  d=(k+y*k-x)%(x-1);
                  if(d==0)
                  cout<<c+1+k<<endl;
                  else cout<<c+2+k<<endl;
                  
                  }
                  

                  } whats the prob wid this code?

                • »
                  »
                  »
                  »
                  »
                  »
                  »
                  »
                  »
                  4 years ago, # ^ |
                    Vote: I like it 0 Vote: I do not like it

                  When x>(k+y*k), we need to print k+1 as you will exchange one stick for x sticks and k sticks for k coals.

                • »
                  »
                  »
                  »
                  »
                  »
                  »
                  »
                  »
                  4 years ago, # ^ |
                    Vote: I like it +1 Vote: I do not like it

                  thank you so much. It got accepted

                • »
                  »
                  »
                  »
                  »
                  »
                  »
                  »
                  »
                  4 years ago, # ^ |
                    Vote: I like it 0 Vote: I do not like it

                  NoobM, shaded I had the same issue. And you are right python's inbuilt ceil function and as a matter of fact square root function does not work properly in case of long long numbers.

                  So, to solve this issue I found out a solution on stackoverflow. To find the ceil value of division of a by b you can simply do -(a//(-b)) in python and -(a/(-b)) in C++, i did this and got AC.

              • »
                »
                »
                »
                »
                »
                »
                »
                4 years ago, # ^ |
                  Vote: I like it 0 Vote: I do not like it

                look you have 0 coals so you will need k steps for k coals.Now as for the sticks you need k sticks to match the coals for conversion into torch.You also need k*y sticks extra so they can be converted into coals later.So, total you need to add (k*y+k-1) sticks extra(since you already have one stick). Now in every trade for sticks you gain x-1 sticks,so, number of steps required is :- (val/(x-1))+min((int)1,(val%(x-1))) where val is (k*y+k-1). So,total no. of steps is (k+(val/(x-1))+min((int)1,(val%(x-1))))

»
4 years ago, # |
Rev. 2   Vote: I like it +61 Vote: I do not like it

Just curious to know, How they have such a large collections of problems?

they are soon going to make century of educational rounds

»
4 years ago, # |
  Vote: I like it +9 Vote: I do not like it

before: educational so unbearable will again be one math

Now: wow they are doing really interesting rounds of course I will write it

»
4 years ago, # |
Rev. 2   Vote: I like it -9 Vote: I do not like it

Hope I will get some increase today...

»
4 years ago, # |
  Vote: I like it +411 Vote: I do not like it

»
4 years ago, # |
Rev. 2   Vote: I like it -85 Vote: I do not like it

A

  • »
    »
    4 years ago, # ^ |
      Vote: I like it +41 Vote: I do not like it

    There has been bad incidents in the past( Long queues, round being unrated, pretests weak/wrong) whenever some author didn't thank Mike. So nobody wants to take the risk you see XD

  • »
    »
    4 years ago, # ^ |
      Vote: I like it +131 Vote: I do not like it

    Mike unlinke Mark doesn't sell your data, maintains ad free site, we get quality problems completely free of cost, and without watching any ads like SPOJ. People thank Mike out of gratitude for him.

»
4 years ago, # |
  Vote: I like it -11 Vote: I do not like it

Wish me luck, please!

»
4 years ago, # |
Rev. 2   Vote: I like it -22 Vote: I do not like it

Let's go!

»
4 years ago, # |
  Vote: I like it +41 Vote: I do not like it

Just curious to know, we don't have any problem tester in educational rounds? Or is the same set of people involved in testing the problems?

  • »
    »
    4 years ago, # ^ |
      Vote: I like it +3 Vote: I do not like it

    If only they were less greedy and given free contribution to testers, this round would have been rated

»
4 years ago, # |
  Vote: I like it +7 Vote: I do not like it

I hope it has strong pretest and interesting problems!

»
4 years ago, # |
  Vote: I like it -9 Vote: I do not like it

I would like to know which debuging tool are you using? Oh, I suddenly realized that we don't need in cf :D But I still want to hear suggestions

»
4 years ago, # |
  Vote: I like it +3 Vote: I do not like it

Purple Rain

»
4 years ago, # |
  Vote: I like it +14 Vote: I do not like it

Hey, this is my first time participating in the educational round and I have a simple question. I quite can't grasp the idea of the time penalty. (I searched up the rules but I still don't get it.)

To the best of my understandings, is it one of the followings? 1) the final score is directly related to time consumed 2) total time of 2 hrs gets shorter by 10 minutes for each wrong submission

  • »
    »
    4 years ago, # ^ |
    Rev. 3   Vote: I like it +46 Vote: I do not like it

    Let's say you submitted 2 source code.
    Submission 1: got the WA at 00:03
    Submission 2: got the AC. at 00:07

    Then you get just the same score who got the AC at 00:17.

»
4 years ago, # |
  Vote: I like it +68 Vote: I do not like it

All the best Guys, noob here hope i will make some score today..

  • »
    »
    4 years ago, # ^ |
      Vote: I like it +31 Vote: I do not like it

    I think you are a famous noob as you are getting upvoted by people :)...otherwise lower rating participants always get downvoted here

»
4 years ago, # |
  Vote: I like it +44 Vote: I do not like it

This contest is a nightmare.

»
4 years ago, # |
  Vote: I like it +4 Vote: I do not like it

so sad that this round will be unrated after all the effort to solve the first few problems

»
4 years ago, # |
Rev. 2   Vote: I like it +17 Vote: I do not like it

Thank God! It got Unrated.
Problem A made me feel so worthless today.

»
4 years ago, # |
  Vote: I like it +4 Vote: I do not like it

Back to UnratedForces...

»
4 years ago, # |
Rev. 2   Vote: I like it +14 Vote: I do not like it

problem A was so irritating before:( now it is good:)

»
4 years ago, # |
  Vote: I like it -84 Vote: I do not like it

Please let this round rated back :((. Just a small issue from the problem A right ?

  • »
    »
    4 years ago, # ^ |
      Vote: I like it +36 Vote: I do not like it

    Not a small issue for those whose schedule and timing of the contest is completely ruined.

»
4 years ago, # |
  Vote: I like it +90 Vote: I do not like it

It was obvious that round will be unrated when I saw those wandering trader deals.

»
4 years ago, # |
Rev. 2   Vote: I like it 0 Vote: I do not like it

It's unfortunate that the negativity started in the comment section, in particular this comment has eventually cursed the round and a good problemset. :'(

»
4 years ago, # |
  Vote: I like it +47 Vote: I do not like it

Out of curiosity how did whatever mistake happened slip through on A? It seems to have been a major error considering that all the samples itself were wrong.

  • »
    »
    4 years ago, # ^ |
    Rev. 2   Vote: I like it +6 Vote: I do not like it

    Anyone got it right when the data was not changed?

    I made the same mistake and passed all tests when the sample was not changed. Maybe the testers said "Hey, how could there be bugs in A?" and simply let it slip thru.

    • »
      »
      »
      4 years ago, # ^ |
        Vote: I like it 0 Vote: I do not like it

      I submitted within a minute of the change, there were 800 submissions by that point. There were 400-500ish before that.

  • »
    »
    4 years ago, # ^ |
      Vote: I like it 0 Vote: I do not like it

    really wonder how this obvious error can be passed in Polygon...

    • »
      »
      »
      4 years ago, # ^ |
        Vote: I like it +3 Vote: I do not like it

      Yeah, I would expect that there should have been at least a "should TLE" brute force. Moreover how did it pass testing? Did all the testers make the same mistake? Frankly this makes me think that educational rounds don't actually have a testing phase.

      • »
        »
        »
        »
        4 years ago, # ^ |
          Vote: I like it 0 Vote: I do not like it

        literally likely. A previous error make that Problem B can be accepted by almost any way, but nobody noticed that and as a result I got unrated.

»
4 years ago, # |
  Vote: I like it +3 Vote: I do not like it

I thought for a long time why the test case came out like this.

»
4 years ago, # |
  Vote: I like it +20 Vote: I do not like it

They should explain the sample test case of first question.

  • »
    »
    4 years ago, # ^ |
      Vote: I like it +12 Vote: I do not like it

    New way to make problem A hard to implement.

»
4 years ago, # |
  Vote: I like it -96 Vote: I do not like it

Damn these unrated rounds. Ruined my first contest.

»
4 years ago, # |
  Vote: I like it +6 Vote: I do not like it

I feel really sorry for setters. They have make good problemset using a lot of efforts. Contest has been ruined only by A problem.

»
4 years ago, # |
Rev. 2   Vote: I like it -14 Vote: I do not like it

Unrated round because of a simple maths problem. Sad for setters and competitors, there should be a tester in edu rounds

»
4 years ago, # |
Rev. 2   Vote: I like it +38 Vote: I do not like it

This is pretty sad. Even if educational rounds don't have testers (which they should), can't you at least have more than 1 person write model/correct solutions? I know how polygon works and it's not very hard to simply ask someone else to upload another solution and find any mistakes, especially in problem A.

»
4 years ago, # |
  Vote: I like it -109 Vote: I do not like it

WHY UNRATED? IT WAS THE EDUCATIONAL ROUND IN WHICH I COULD HAVE IMPROVED MY RATINGS. WHY THIS ALWAYS HAPPENS WITH ME.GOD! AM I THAT BAD?

»
4 years ago, # |
Rev. 2   Vote: I like it -8 Vote: I do not like it

Does anyone check the correctness of the problem A??? Bad experience!

»
4 years ago, # |
  Vote: I like it +6 Vote: I do not like it

Im sad because problems B and C were cool, usually I dislike them, but in this contest they were pretty nice :(

»
4 years ago, # |
Rev. 3   Vote: I like it -10 Vote: I do not like it

Sorry, looks like its only my problem

DELETED

  • »
    »
    4 years ago, # ^ |
    Rev. 2   Vote: I like it -7 Vote: I do not like it

    this is the problem D screenshot from my screen, just notice to word "piles"

    also i asked some of my friends and they had same problem

    BTW, if you don't have this problem, sorry for unrelated comment

»
4 years ago, # |
  Vote: I like it +26 Vote: I do not like it

Leaving aside A, other problems are very interesting, do give it a try guys :D

  • »
    »
    4 years ago, # ^ |
      Vote: I like it 0 Vote: I do not like it

    But it is no point for me to stay overnight now... I've refrained from staying up for three days in preparation of this contest

    • »
      »
      »
      4 years ago, # ^ |
        Vote: I like it +9 Vote: I do not like it

      wow, that sounds so inspiring, but don't worry your hard work will pay off in the next contest for sure :D

»
4 years ago, # |
  Vote: I like it -8 Vote: I do not like it

Damn that was the first time I've solved 2 problems in 20 minutes. But... it's unrated. So sad.

»
4 years ago, # |
  Vote: I like it -8 Vote: I do not like it

hello everybody. I'm curious to know how to become a tester of the round. if there is a link or description about becoming a tester of the round please leave it under this comment. thank you.

»
4 years ago, # |
  Vote: I like it +71 Vote: I do not like it

Please don't keep sample tests unexplained even if its problem A.

  • »
    »
    4 years ago, # ^ |
      Vote: I like it +15 Vote: I do not like it

    I think the author could have realized his mistake had he written the explanation of the sample tests once.

»
4 years ago, # |
  Vote: I like it -24 Vote: I do not like it

Can we please have a div3 at least until saturday?

»
4 years ago, # |
  Vote: I like it +12 Vote: I do not like it

Can you please explain the test case 3 for problem A,

»
4 years ago, # |
  Vote: I like it +59 Vote: I do not like it

(44wfcm.png)

  • »
    »
    4 years ago, # ^ |
      Vote: I like it +19 Vote: I do not like it

    Tbh, problem A is pretty easy just like normal A's a simple one line formula for AC, only difference is, they messed up the sample test cases which made it a lot confusing, adding on to that they didn't provide any explanations.

»
4 years ago, # |
  Vote: I like it -11 Vote: I do not like it

Every other educational round:
me: if I can't solve B I definitely can't solve C.
them: we shall make sure you don't solve B.
me: end up solving just A.
Today:
me: solves A & B in under 20 minutes.
them: unfortunately this round will be unrated.

P.S: I know the frustration is higher for the writers when a round becomes unrated, so feeling sorry for them too.

»
4 years ago, # |
  Vote: I like it +119 Vote: I do not like it

»
4 years ago, # |
  Vote: I like it 0 Vote: I do not like it

I wrote 2 codes for problem B they gives same output to sample but one of them passes the sample one of them don't but they gives same output for output but when i submit it says wrong on this sample input why?

»
4 years ago, # |
  Vote: I like it +25 Vote: I do not like it

Before the samples of problem A were fixed, there were already about 1K submissions. I wonder what solution they submitted?

  • »
    »
    4 years ago, # ^ |
      Vote: I like it +5 Vote: I do not like it

    Can I tell it now? I made the same mistake.

  • »
    »
    4 years ago, # ^ |
      Vote: I like it +7 Vote: I do not like it

    None of them did add the other operation and it was more likely that no one added.

  • »
    »
    4 years ago, # ^ |
      Vote: I like it 0 Vote: I do not like it

    Maybe they did so without seeing the sample testcase and worked it on their own... I have seen many coders do that maybe out of competition or confidence

    • »
      »
      »
      4 years ago, # ^ |
        Vote: I like it +16 Vote: I do not like it

      If the jury's mistake was: the statement says you should count both type of operations or at least is ambiguous so it can be interpreted this way, but model solution counts only one of them, then IMO it's a little weird decision to change the tests rather than just make an announcement like: "you should count only operations of type 1, we have updated the statement to make it clear".

      • »
        »
        »
        »
        4 years ago, # ^ |
        Rev. 3   Vote: I like it +10 Vote: I do not like it

        It was worse than that as far as I understand

        The jury's solution also had a rounding error. So they couldn't just correct the statement the way you suggest

        This was the accepted solution at the time of the round

            need_sticks = (y + 1) * k
            cnt = (need_sticks - 1) // (x - 1)
            print(cnt)
        
  • »
    »
    4 years ago, # ^ |
    Rev. 3   Vote: I like it +22 Vote: I do not like it

    I adjusted my solution to the samples without much thinking when I saw that it does not match the result. Added incorrect rounding and omited the second operation.

    I thought "I don't have time to think about it, will figure out why it has to be this way after the contest"

    And then I had to return everything back...

»
4 years ago, # |
  Vote: I like it 0 Vote: I do not like it

Did a rejudge on B just happen? Some people's Bs got converted from pretests passed to WA on pretest 1.

»
4 years ago, # |
  Vote: I like it -10 Vote: I do not like it

I am just curious, How is it happen. Is both setter and tester got the same idea for the solution.

  • »
    »
    4 years ago, # ^ |
      Vote: I like it +3 Vote: I do not like it

    Probably I actually got the wrong solution on my first try which matched their test case.

    • »
      »
      »
      4 years ago, # ^ |
        Vote: I like it 0 Vote: I do not like it

      That's crazy level of coincidence

      • »
        »
        »
        »
        4 years ago, # ^ |
        Rev. 2   Vote: I like it +3 Vote: I do not like it

        Well the mistake was not counting the 2nd kind of trades so basiclly we output ans-k instead of ans.

»
4 years ago, # |
  Vote: I like it -25 Vote: I do not like it

Problem A like a nightmare:(

»
4 years ago, # |
  Vote: I like it +33 Vote: I do not like it

»
4 years ago, # |
Rev. 2   Vote: I like it +57 Vote: I do not like it

this is what happens when you push code to production without writing unit tests

»
4 years ago, # |
  Vote: I like it +1 Vote: I do not like it

This contest is really cursed.

»
4 years ago, # |
  Vote: I like it 0 Vote: I do not like it

When I found the problems easy and solve them fast, the round became unrated. Bad luck for all :(

»
4 years ago, # |
  Vote: I like it -7 Vote: I do not like it

What a stupid contest !

»
4 years ago, # |
  Vote: I like it 0 Vote: I do not like it

there should have been testers for the round , as 2 problems had issues in them.

»
4 years ago, # |
  Vote: I like it +21 Vote: I do not like it

Didn't anyone test this pre-test?

»
4 years ago, # |
  Vote: I like it 0 Vote: I do not like it

is the round unrated?

»
4 years ago, # |
  Vote: I like it +3 Vote: I do not like it

The contest problems were good enough but only problem was with the checker.Enjoyed problem solving

»
4 years ago, # |
  Vote: I like it +25 Vote: I do not like it

Waiting for announcement regarding Problem C

»
4 years ago, # |
  Vote: I like it -14 Vote: I do not like it

now as the contest is unrated , will there be a hacking phase or we will go strait up to system testing?

»
4 years ago, # |
  Vote: I like it +4 Vote: I do not like it

Every time I perform little better the contest gets unrated. ;__;

»
4 years ago, # |
  Vote: I like it +8 Vote: I do not like it

BledDest for preparing A & B ? Still remember he writes his checker by casting INT to BOOL.

  • »
    »
    4 years ago, # ^ |
      Vote: I like it +31 Vote: I do not like it

    No, this time I prepared G

    • »
      »
      »
      4 years ago, # ^ |
        Vote: I like it 0 Vote: I do not like it

      Great thanks to you for preparing EDU rounds and wish a better experience next time !

»
4 years ago, # |
  Vote: I like it +38 Vote: I do not like it

 ;(

»
4 years ago, # |
Rev. 2   Vote: I like it 0 Vote: I do not like it

I think there is a wrong output in Problem B 4th Case:

Your ouput: -4 0 1 6 3

p=[−4,−4,−3,3,6]

k=3 But i have better Solution:

1 0 -4 6 3

p= 1 1 -3 3 6

k=1.

  • »
    »
    4 years ago, # ^ |
    Rev. 2   Vote: I like it 0 Vote: I do not like it

    I think we just don't understand what the problem really want , I have the same case as you in my solution

  • »
    »
    4 years ago, # ^ |
      Vote: I like it 0 Vote: I do not like it

    Let k be the maximum j (1≤j≤n).. k is not negative value count that is index.. but your solution is also correct max index is also 3 as in the test case !!

»
4 years ago, # |
  Vote: I like it 0 Vote: I do not like it

I didn't read comments . Now I got to know the round is unrated.. __

»
4 years ago, # |
  Vote: I like it 0 Vote: I do not like it

Couldn't even solve one complete question. Need a lot of practice for me. Any good resources and motivation to learn more about competitive coding.

  • »
    »
    4 years ago, # ^ |
      Vote: I like it +3 Vote: I do not like it

    It is OK, go to the problem set sort the problems by difficulty and start practicing with the easier ones, you will be able to solve A problems in a short time

»
4 years ago, # |
Rev. 2   Vote: I like it +1 Vote: I do not like it

Problems were outstanding. But, A's sample test ruined it :(

»
4 years ago, # |
  Vote: I like it 0 Vote: I do not like it

Very sad to know that the round is unrated after I tried so hard to solve D&E..

»
4 years ago, # |
  Vote: I like it +17 Vote: I do not like it

Rating is just a number. The problems were interesting and instructive. Thank you all problem setters!

Waiting for the editorial.

»
4 years ago, # |
  Vote: I like it +25 Vote: I do not like it

Thanks to GOD that the contest was unrated....... The problems are hard and hard to understand.......

»
4 years ago, # |
  Vote: I like it +320 Vote: I do not like it

I'm really sorry about the issue with the problem A. This was completely my fault. I re-checked the formula yesterday and discussed it with others and nobody found any mistakes.

1) I didn't round up the result of the division.

2) I forgot about $$$k$$$ trades you need to get coals.

So, my solution was completely incorrect. I will not blame anyone else because this was my problem and I failed its preparation. I didn't want this round to be unrated and this issue right at the start of the contest just completely ruined me. Sorry guys.

  • »
    »
    4 years ago, # ^ |
      Vote: I like it +38 Vote: I do not like it

    its ok, human are not perfect

  • »
    »
    4 years ago, # ^ |
      Vote: I like it +15 Vote: I do not like it

    aw man

  • »
    »
    4 years ago, # ^ |
      Vote: I like it +51 Vote: I do not like it

    Mistakes happen. You are a great problem setter. I've always liked your problems <3

  • »
    »
    4 years ago, # ^ |
      Vote: I like it +14 Vote: I do not like it

    It is OK man, it is kind of encouraging for us beginners to see that even strong coders sometimes make mistakes in problem A ;-)

  • »
    »
    4 years ago, # ^ |
      Vote: I like it -9 Vote: I do not like it

    wouldn't it be nice idea to extend the time of round by 10 more minutes instead of making it as unrated, because the problems are extremely good , feeling sad for this round becoming unrated

    • »
      »
      »
      4 years ago, # ^ |
        Vote: I like it +11 Vote: I do not like it

      Sadly, if the first problem is wrong, it affects almost anyone. And also this was not the only issue because the checker of the problem B was incorrect. Cursed round. Really cursed.

  • »
    »
    4 years ago, # ^ |
      Vote: I like it +2 Vote: I do not like it

    Well mistakes do happen, but the problem itself was good.Just curious how did it slip away from testers?

  • »
    »
    4 years ago, # ^ |
      Vote: I like it 0 Vote: I do not like it

    This is a pretty bad mistake, but you handled it pretty well during the competition and now by admitting to it. I'm surprised that nobody noticed the issue, did anyone actually solve the problem (in code) other than you?

    • »
      »
      »
      4 years ago, # ^ |
        Vote: I like it 0 Vote: I do not like it

      One person solved it before the contest. Sadly, he just tried to find the formula which passes the example. This is fun and sad at the same time.

      • »
        »
        »
        »
        4 years ago, # ^ |
          Vote: I like it +8 Vote: I do not like it

        Well don't you think it's a good idea to have multiple testers on every problem regardless of its difficulty? If testing status were always like this, this situation were bound to happen.

        • »
          »
          »
          »
          »
          4 years ago, # ^ |
            Vote: I like it +1 Vote: I do not like it

          There are reasons Educational Rounds are pretty rarely tested and these reasons almost don't belong to me. Moreover, I'm pretty rare guest in Educational Rounds now because I'm mostly busy with Div.3.

          • »
            »
            »
            »
            »
            »
            4 years ago, # ^ |
              Vote: I like it 0 Vote: I do not like it

            That's kinda sad to hear. One might expect sponsored rounds to be more prepared than the regular ones but it sounds like it's not the case.

  • »
    »
    4 years ago, # ^ |
    Rev. 2   Vote: I like it 0 Vote: I do not like it

    But i am surprised to see about 700 people solve the problem before correction. Looking at this i thought i might got something wrong.

  • »
    »
    4 years ago, # ^ |
      Vote: I like it +69 Vote: I do not like it

    No rated contest should have problems that are not stress-tested with a naive slow solution.

    But yeah, shit happens.

»
4 years ago, # |
  Vote: I like it 0 Vote: I do not like it

Problem D — For input [1,3], we move 1 to 2 and 3 to 2. This makes both of them together.

Kindly correct me, if I got it wrong !!

Can anyone explain the test case [1,2,4,8,9,100].

How are we moving the piles to make them together?

  • »
    »
    4 years ago, # ^ |
    Rev. 2   Vote: I like it +3 Vote: I do not like it

    for [1,3] you just keep each one in its place. The problem says to put all of them in at most 2 piles, not necessarily 1.

  • »
    »
    4 years ago, # ^ |
      Vote: I like it +3 Vote: I do not like it

    For input [1,3] the answer is 0, you can leave them at their original positions because you need at most two piles

    For case [1,2,4,8,9,100], you move all the piles except the one at 100 to position 4, which takes 8 moves

»
4 years ago, # |
Rev. 2   Vote: I like it +3 Vote: I do not like it

It seems C was like 1400 and D 2000

Still, sad that it is unrated

  • »
    »
    4 years ago, # ^ |
      Vote: I like it +2 Vote: I do not like it

    D was simple with set and multiset. It is O(q*log(n))

    • »
      »
      »
      4 years ago, # ^ |
      Rev. 2   Vote: I like it -8 Vote: I do not like it

      I wonder if my solution is overcomplicated or I just suck in c++. I couldn't come up with a solution with datastructures available in python and had to implement it in c++

    • »
      »
      »
      4 years ago, # ^ |
        Vote: I like it -24 Vote: I do not like it

      use

      Spoiler
    • »
      »
      »
      4 years ago, # ^ |
      Rev. 2   Vote: I like it +6 Vote: I do not like it

      In the end my estimate was nearly perfect and off by 100

      Though it maybe affected by the fact that the round ended up unrated

»
4 years ago, # |
  Vote: I like it +3 Vote: I do not like it

The problems were really interesting, so unfortunate it became unrated, just curious, how the problem A thing happen? all samples were wrong.

»
4 years ago, # |
  Vote: I like it -8 Vote: I do not like it

Will this round be unrated?

»
4 years ago, # |
  Vote: I like it +7 Vote: I do not like it

I admit it is fair to unrate the contest because of the issue of problem A but I still feel unhappy because I get a pretty good result.

Anyway, thanks to the problem setters. Bad things happen all the time. Do not worry about it too much.

»
4 years ago, # |
Rev. 3   Vote: I like it -23 Vote: I do not like it

Man, Can't catch a break.

cf.jpg

I do feel bad for Problem Setters though. The problems were definitely good.

  • »
    »
    4 years ago, # ^ |
    Rev. 2   Vote: I like it +3 Vote: I do not like it

    Your Graph does not justify this, but Ya, lol

  • »
    »
    4 years ago, # ^ |
      Vote: I like it +19 Vote: I do not like it

    I bet 10 bucks and say if the contest was rated and had no problems, this 46 would be more than 4600.

    • »
      »
      »
      4 years ago, # ^ |
        Vote: I like it +11 Vote: I do not like it

      I'm not denying this. Not at all. Just wanted to post this. It is not meant to be taken seriously.

»
4 years ago, # |
  Vote: I like it +1 Vote: I do not like it

awoo I know this doesn't come under rules but is it possible for you guys to discard the hacking phase as the round is unrated it won't affect much and we don't have to wait for the editorials.

  • »
    »
    4 years ago, # ^ |
      Vote: I like it +11 Vote: I do not like it

    They could post the editorials if they want to, it does not depend on the hacking phase.

»
4 years ago, # |
  Vote: I like it -57 Vote: I do not like it

Honestly, did not liked the problems much. A, B, C where long and fairly unclear statements. D was long, too, but at least clear.

E, F, G might be to hard, I assume less than 20 rated participants would have solved any of them.

  • »
    »
    4 years ago, # ^ |
      Vote: I like it -25 Vote: I do not like it

    Just noticed that I missunderstood D, it is not that we can move at all positions x, we can move all objects at one position x. So this is is shitty misunderstandable statement, too.

»
4 years ago, # |
  Vote: I like it 0 Vote: I do not like it

Did D have some elegant implementation? There was too much case work in my solution.

»
4 years ago, # |
  Vote: I like it 0 Vote: I do not like it

where did we receive notification regarding making round non rated?

»
4 years ago, # |
  Vote: I like it +5 Vote: I do not like it

Can anyone explain how to solve G because the question was pretty straightforward ??

»
4 years ago, # |
  Vote: I like it +8 Vote: I do not like it

How to solve F and G?

  • »
    »
    4 years ago, # ^ |
    Rev. 5   Vote: I like it +29 Vote: I do not like it

    F: Fix $$$d = gcd(x_1, x_2)$$$ where $$$x_2$$$ is yet to be determined, also the condition $$$l \le x_1y_1 \le r$$$ gives some bounds $$$L \le y_1 \le R$$$.

    If $$$x_1 = dk$$$, $$$x_2 = ds$$$ then we need $$$s \mid y_1$$$ and $$$k < s \le \frac{n}{d}$$$. We have two cases:

    1. If $$$x_1 \le \frac{n}{2}$$$, then consider $$$x_2 = 2x_1$$$. If $$$y_1$$$ has at least two possible values then at least one is even and we win. (Choose $$$x_1, y, 2x_1, y/2$$$). Otherwise, there's only one possible $$$y_1$$$, and it's easy to check if it works.

    2. If $$$x_1 > \frac{n}{2}$$$, then $$$R \le 2m$$$. Keep a BIT over $$$a[i] = \text{ number of multiples of } i \text{ in } [L, R]$$$, you can keep this updated by doing a total of $$$O(m \log m)$$$ updates, and you can find possible choices for $$$s$$$ by querying the interval $$$[k + 1, n / d]$$$. There's a total of $$$O(n \log n)$$$ choices for $$$d$$$ (counting over all possible values of $$$x_1$$$), so there's also this many queries. This gives a $$$\log^2$$$ solution.

  • »
    »
    4 years ago, # ^ |
    Rev. 9   Vote: I like it +36 Vote: I do not like it

    My solution to problem G, AC after 8 minutes of the contest :(

    Let's iterate over all R from left to right, and count how many L such that the subarray [L..R] is good for each fixed R.

    When we are now on a fixed R, we need to know for each number X, what is the range of valid Ls such that the frequency of X in range [L .. R] is 3.

    We can easily do that by storing the indices of number X in a vector V, let's say that the vector size is K, so the valid range of Ls for this X is [V[K-4]+1, v[k-3]], we will use a lazy segment tree to increase / decrease this range each time we see X.

    Let's form an array called can[i], can[i] equals how many distinct numbers in range [i .. R] having frequency equals 3.

    Now our task becomes, for each R, count how many Ls, such that can[L] equals to the number of distinct integers in range [L .. R]. Let's say that distinct[i] = number of distinct integers in range [i..R]. We can easily update distinct[i] while we are iterating over R, when we find a number X we just need to increase distinct[j] by one, such that lastPostition[X] + 1 <= j <= i. We can do that using the same lazy segment tree.

    So we need to count how many (can[i] — distinct[i] == 0). Since (can[i] <= distinct[i]), then (can[i] — distinct[i] <= 0), so we just need to know what is the max number in the lazy segment tree, and if it was 0, we will add the frequency of the max to the answer. So we just need to support querying the max number and its frequency in the segment tree.

    My code: 92841078

»
4 years ago, # |
  Vote: I like it 0 Vote: I do not like it

Can anyone explain the solution of C?

  • »
    »
    4 years ago, # ^ |
      Vote: I like it 0 Vote: I do not like it

    There is two cases.

    1) The first character is 1, then friend have to use the skip(obviously).

    2) There is substring "111". For any other case we can avoid using the skip

  • »
    »
    4 years ago, # ^ |
      Vote: I like it 0 Vote: I do not like it

    I used a dp.

    dp[i][pl][isSecond] is min number of skip points to kill ith boss by player pl with isSecondsth move.

    92828592

  • »
    »
    4 years ago, # ^ |
      Vote: I like it 0 Vote: I do not like it

    I used greedy: For every turn, if its the friend's turn, kill the current boss and see if the next boss is easy, then kill it as well. If its your turn, then kill the current boss and see if the next boss is difficult, then kill it as well.

    My solution

    • »
      »
      »
      4 years ago, # ^ |
      Rev. 2   Vote: I like it +1 Vote: I do not like it

      sh_maestro I did the same but got WA on test 2.

      my code
      • »
        »
        »
        »
        4 years ago, # ^ |
          Vote: I like it 0 Vote: I do not like it

        funny, same error as mine ;)

        "wrong answer 55th numbers differ — expected: '0', found: '1'"

        • »
          »
          »
          »
          »
          4 years ago, # ^ |
            Vote: I like it 0 Vote: I do not like it

          If you figure out that test case , please tell . I am also getting wrong on same test case.

          • »
            »
            »
            »
            »
            »
            4 years ago, # ^ |
              Vote: I like it +4 Vote: I do not like it

            Most probably 55th Test of 2nd test case is-

            5

            0 0 0 1 1

            • »
              »
              »
              »
              »
              »
              »
              4 years ago, # ^ |
                Vote: I like it +1 Vote: I do not like it

              Thanks!

            • »
              »
              »
              »
              »
              »
              »
              4 years ago, # ^ |
                Vote: I like it 0 Vote: I do not like it

              hey, I also found a similar test case during contest when my similar greedy solution failed on tc-2, but I want to ask that how can we prove the greedy solution wrong by using some mathematical argument or Is finding a counter-example is the only way? as sometime it may be hard to find a counter-example and also takes a lot of time.

        • »
          »
          »
          »
          »
          4 years ago, # ^ |
            Vote: I like it 0 Vote: I do not like it

          In the code by sh_maestro, he is skipping the case when it is your turn and a[i]==0 then he is skipping the boss.

                  if(turn) 
                  {
          	    if(a[i]) 
                      {
          	      ret++;
          	    }
          	    i++;
          	    if(i>=n) break;
          	    if(!a[i])
          	    i++;
                  }
          	else {
          	     if(a[i])    //Why adding this line makes this code AC?
          	     i++;
          	     if(i<n && a[i])
          	     i++;
          	}
          	turn = !turn;
          

          I don't understand why does it lead to correct answer?

      • »
        »
        »
        »
        4 years ago, # ^ |
          Vote: I like it 0 Vote: I do not like it

        I guess the only difference is that I don't kill a boss every turn (I leave the easy bosses for the friend) — since either of us has to kill 1 or 2 bosses every turn. But if there's a hard boss, I always kill him (and the subsequent one — should that be a hard boss as well).

    • »
      »
      »
      4 years ago, # ^ |
        Vote: I like it 0 Vote: I do not like it

      I tried to implement exactly that, but got WA. Can you see where I did wrong? 92817183 thanks

      • »
        »
        »
        »
        4 years ago, # ^ |
        Rev. 2   Vote: I like it 0 Vote: I do not like it

        The problem statement is a bit vague and there is room for error — after reading your solution, I re-read it and can see why someone would go with that approach.

        The key difference is that it is not essential for both you and your friend to kill a boss in your turns. So my solution was something like this:

        • The friend starts. He kills the first boss (regardless of hard/easy). Then if the next one is easy, he kills that as well.
        • It's my turn now. If it's a hard boss, I kill it. If there is another one and it's a hard boss, I kill that as well. However, if I had an easy boss, I would just skip my turn, so my friend could kill it in his turn.
        • »
          »
          »
          »
          »
          4 years ago, # ^ |
            Vote: I like it 0 Vote: I do not like it

          Sorry, I still do not see the difference.

          The friend uses his second hit if current boss is 0, I use my second hit if the current boss is 1. Where differs your solution from this?

          I did understand that this logic fails for 0 0 0 1 1

          • »
            »
            »
            »
            »
            »
            4 years ago, # ^ |
              Vote: I like it +3 Vote: I do not like it

            "During one session, either you or your friend can kill one or two bosses" — sounds like either my friend or I (or both) have to kill 1 or 2 bosses each round. Though the lines that follow imply that both of us have to alternate and have to kill 1 or 2 bosses in our turn.

            If the statement implies that its mandatory to kill a boss in each turn (as opposed to kill 1-2 bosses in either my friend or my turn), then my solution is wrong (and yours and the other solutions shared here who got WA are correct). The problem writer would need to clarify what the intent was.

            • »
              »
              »
              »
              »
              »
              »
              4 years ago, # ^ |
                Vote: I like it +6 Vote: I do not like it

              I think I just got why your solution works.

              The key realization is when you are skipping, you can actually imagine that as transferring the previous job to me(basically take it away from friend). Then it, doesn't matter whether it was a 1 or 0. It will not affect the answer. The special case is when there is a 0 at the second position. This time you cannot take the previous job, so we imagine that our friend finished the first two bosses. If in the third position, we have a one, "I" will take care and if it is a zero, then we again imagine a redistribution of work in which first job was done by our friend, second one by me and third one by friend again. This way, the solution always yield the optimal answer.

              • »
                »
                »
                »
                »
                »
                »
                »
                4 years ago, # ^ |
                  Vote: I like it 0 Vote: I do not like it

                That's an interesting insight! One thing to think about is what happens when this renegotiation ripples to the beginning (i.e. after the negotiation, the first boss needs to be killed by me, however the solution requires the first boss to be always killed by the friend).

                • »
                  »
                  »
                  »
                  »
                  »
                  »
                  »
                  »
                  4 years ago, # ^ |
                    Vote: I like it 0 Vote: I do not like it

                  We will not have the ripple back effect because we are always alternating turns and each player can at max handle 2 jobs. When you get a 0 in second place, the friend will take care of it, if we get one more 0, we redistribute as follows:-

                  First(it may be 0 or 1) one is done by friend, second by me and third one by friend again.

                  If you have any counterexamples in mind, please share them?

                • »
                  »
                  »
                  »
                  »
                  »
                  »
                  »
                  »
                  4 years ago, # ^ |
                    Vote: I like it +8 Vote: I do not like it

                  Not a counterexample, but how would we explain this for 1 0 0 1 1? I.e. what does the friend take first, then us, etc.

                • »
                  »
                  »
                  »
                  »
                  »
                  »
                  »
                  »
                  4 years ago, # ^ |
                  Rev. 3   Vote: I like it +8 Vote: I do not like it

                  Okay, so the working will be as follows:-

                  1. First our friend finishes the first two bosses "1 0".

                  2. When we see a "0", we exchange the last boss finished, i.e. "1" one done by friend, the next "0" is done by me and the third "0" is done by friend.

                  3. This way, in the next turn we get to finish the next two hard bosses "1 1" and we are done.

                  I wrote a code for this idea with comments:-link to submission.

                  Did I explain your question?

              • »
                »
                »
                »
                »
                »
                »
                »
                4 years ago, # ^ |
                  Vote: I like it +8 Vote: I do not like it

                Amazing realization, thank you for that, it really did help understand the greedy approach:)

        • »
          »
          »
          »
          »
          4 years ago, # ^ |
            Vote: I like it 0 Vote: I do not like it

          As far as I understood the problem, it's mandatory to kill at least one boss in any session (friend's turn or my turn). How can you skip "my" turn?

    • »
      »
      »
      4 years ago, # ^ |
        Vote: I like it 0 Vote: I do not like it

      In the code you have provided in the link, if its my turn and the a[i]==0 then, you have skipped the testcase. I can't understand that part.

      • »
        »
        »
        »
        4 years ago, # ^ |
        Rev. 2   Vote: I like it 0 Vote: I do not like it

        I think that's because you would like to (greedily) give the 0 values to your friend , to reduce the count. If you yourself use that value 0 ,then next values may be like 1,1 and friend will need 1 more skip in that case.

        • »
          »
          »
          »
          »
          4 years ago, # ^ |
            Vote: I like it 0 Vote: I do not like it

          What about this line: During one session, either you or your friend can kill one or two bosses (neither you nor your friend can skip the session, so the minimum number of bosses killed during one session is at least one). After your friend session, your session begins....?

    • »
      »
      »
      4 years ago, # ^ |
        Vote: I like it 0 Vote: I do not like it

      I think your solution is correct but explanation is slightly wrong bro, Consider the given case : 1 0 0 1 1

      optimal moves -> Friend, Me, Friend, Me, Me

      but according to your explanation your friend will see that second boss is easy and therefore he will kill it and that will result in not being an optimal choice, isn't it?

      • »
        »
        »
        »
        4 years ago, # ^ |
          Vote: I like it 0 Vote: I do not like it

        The way it works right now would be something like ("F" = Friend, "M" = Me) :

        1 0 0 1 1
        F F F M M
        

        In the above example, on the third boss, I see an easy boss and would skip it (so the friend can kill it)

        Some more examples:

        0 0 0 1 1
        F F F M M
        
        0 0 0 1 1 1 0 1 0
        F F F M M F F M F
        

        In the last example, I can only kill 2 bosses at most, so my friend is forced to use a skip point at boss number 6.

  • »
    »
    4 years ago, # ^ |
      Vote: I like it 0 Vote: I do not like it

    You have to find islands of 1 starting from index 1 and 2 ,then divide it by 3 my soln

»
4 years ago, # |
  Vote: I like it +8 Vote: I do not like it

I couldn't solve a single problem. I hope editorial will help me.

»
4 years ago, # |
  Vote: I like it +20 Vote: I do not like it

»
4 years ago, # |
  Vote: I like it -26 Vote: I do not like it

ok, what I've found out from the round.

  1. I should not have divided doubles

  2. I should have read the tasks very carefully (super carefully, extremely carefully).

»
4 years ago, # |
  Vote: I like it 0 Vote: I do not like it

Looks like there were no testers for this round.

»
4 years ago, # |
  Vote: I like it 0 Vote: I do not like it

Oh my god, 2 questions with minecraft references, who made those questions dude???

»
4 years ago, # |
Rev. 2   Vote: I like it +3 Vote: I do not like it

Can someone please help me out to find flaw in my logic for question D?

-> At the end for each query we are just interested in dividing the array(sorted array) into two subarrays.

-> Answer would be diff (max element and min element of first subarray) + diff(max element and min element of second subarray).

-> Also dividing subarray would be optimal when we divide around mid value(max element + mid element)/2

Attached my solution(not sure why its failing on test case 3)92839897

It would be great if someone can please provide a counter example so that I can figure out why my algo is incorrect.

Thanks In Advance.

  • »
    »
    4 years ago, # ^ |
      Vote: I like it 0 Vote: I do not like it

    1
    4
    1 1 100 1000000

    • »
      »
      »
      4 years ago, # ^ |
        Vote: I like it 0 Vote: I do not like it

      Sorry man, I am not able to understand your test case. What I understood from question, all the pi will be different and in above test case there are two ones.

  • »
    »
    4 years ago, # ^ |
      Vote: I like it 0 Vote: I do not like it

    Also dividing subarray would be optimal when we divide around mid value(max element + mid element)/2

    Try 1,3,4,5,6; optimal division point is at 2

    • »
      »
      »
      4 years ago, # ^ |
        Vote: I like it 0 Vote: I do not like it

      What is the expected correct answer? I can see my solution gives answer as 3. Is that incorrect?

      • »
        »
        »
        »
        4 years ago, # ^ |
          Vote: I like it +3 Vote: I do not like it

        The answer is end value — starting value — (maximum distance between any two consecutive elements after sorting ofcourse)

        • »
          »
          »
          »
          »
          4 years ago, # ^ |
            Vote: I like it 0 Vote: I do not like it

          I see, thanks.

          • »
            »
            »
            »
            »
            »
            4 years ago, # ^ |
            Rev. 3   Vote: I like it +3 Vote: I do not like it

            I made the same mistake :) That is optimal for the 2 sides separately but not combined. Eg: 1, 20, 40, 60, 100. Optimal for 60 to go left.

            • »
              »
              »
              »
              »
              »
              »
              4 years ago, # ^ |
                Vote: I like it 0 Vote: I do not like it

              It was kind of easy to think, but my bad I was just trying to correct my above solution by thinking counter example. I would have thought for a different approach.

»
4 years ago, # |
  Vote: I like it +5 Vote: I do not like it

Can anyone hint me on E?

  • »
    »
    4 years ago, # ^ |
    Rev. 2   Vote: I like it -7 Vote: I do not like it

    $$$O(n*m)$$$ is trivial if you know about linearity of expectation. To optimize it observe that for a fixed shield all $$$d_i$$$ smaller than $$$b_j$$$ have same contribution(number of ways such that we can $$$d_i$$$ damage to $$$j'th$$$ shield) and all $$$d_i$$$ greater than or equal to $$$b_j$$$ have same contribution. Do some counting and prefix sum and binary search and that's it.

    • »
      »
      »
      4 years ago, # ^ |
        Vote: I like it 0 Vote: I do not like it

      I can form the expression. Evaluating it takes O(n) for each sample can't see of a way to optimise it further. Would be great if you could check this out —

      If (count of no of d(j) >= b(i)) <= a[i](Let this be a for the moment) then the answer is zero. Else from linearity of expectation the total damage can be expressed as D = D[1] + D[2].... + D[n]. Clearly E[D[k]] = 0 for k <= a. For any other k > a it remains to evaluate E[D[k]], which can be obtained by using the definition of Expectation and the associated probabilities can be obtained using combinatorical arguments.(Does there exist a smarter way of doing this, without explicit counting?)

»
4 years ago, # |
  Vote: I like it 0 Vote: I do not like it

can greedy approach work for C ?

  • »
    »
    4 years ago, # ^ |
      Vote: I like it 0 Vote: I do not like it

    No. Dp solution works

    • »
      »
      »
      4 years ago, # ^ |
        Vote: I like it 0 Vote: I do not like it

      I am not able to see any case where my greedy solution will fail. It is wrong on some 55th case in tc 2.

  • »
    »
    4 years ago, # ^ |
      Vote: I like it 0 Vote: I do not like it

    Yes, just prevent consecutive 3 ones. Check separately for first element.

    • »
      »
      »
      4 years ago, # ^ |
        Vote: I like it 0 Vote: I do not like it

      can you elaborate a bit on how you come up with the greedy solution and also some arguments why your greedy solution work.

      • »
        »
        »
        »
        4 years ago, # ^ |
          Vote: I like it 0 Vote: I do not like it

        after some starting series on one's both players can play optimally to chose their places accordingly that if k consecutive 1s are there then at max only k/3 ones will be handled by friend player due to the fact that since they have the choice to play optimally they can always chose who is going to start this segment of 1s either first player or his friend player. now lets say we start with player who have no bias for 0 ,1 then he will try covering as much as possible he covered 2 ones from k. after this the friend player covers another one. then remaining sequence contains k-3 ones. this happens continuously until k is emptied!. Just handle starting and ending points separately for each segment as they decide optimal choice for next move!.

        Prove that after firs position they can decide any position that they want to pick. lets say in order to come at position i x1 moves included only 1 movement to right and again lets say x2 moves included 2 step movements. then as __gcd(1,2)=1. thus x1*1+x2*2 can take any possible value thus it is always available with us to chose positions in the most optimal manner and minimise the skip points hence we can solve it greedily!

        Have a look at my simple solution!

        92891977

  • »
    »
    4 years ago, # ^ |
      Vote: I like it 0 Vote: I do not like it
    C
  • »
    »
    4 years ago, # ^ |
      Vote: I like it 0 Vote: I do not like it

    Yes We can!

»
4 years ago, # |
  Vote: I like it 0 Vote: I do not like it

Can someone explain the solution of E?

  • »
    »
    4 years ago, # ^ |
    Rev. 5   Vote: I like it +1 Vote: I do not like it

    By linearity of expectation the answer for a fixed shield is the sum of probabilities that monster deals damage times the monster's damage.

    1) Monster deals damage if more than $$$a_i$$$ monsters with damage bigger than or equal to $$$b_i$$$ come before it.

    2) Fix set of all monsters with $$$d_j \ge b_i$$$ and add the current monster to it if it's not already present. Let the size of this set be $$$N$$$.

    3) Then the probability we search is just the probability that in the fixed -- during the step $$$2$$$ -- set the current monster comes at least ($$$a_i + 1$$$)-th. We don't care about other monsters, that is, we look only at relative positions of a fixed set

    4) Probability that monster comes at any position is 1/N, so the probability $$$P(pos \gt a_i) = \frac{N - a_{i}}{N}$$$.

    5) $$$O(nm)$$$ solution is as follows: calculate $$$d_j P(pos \gt a_i)$$$ for each monster $$$j$$$ and each shield $$$i$$$.

    6) it can be optimized using binary search and prefix sums.

»
4 years ago, # |
  Vote: I like it +2 Vote: I do not like it

Hints for G, please?

»
4 years ago, # |
  Vote: I like it 0 Vote: I do not like it

What's the logic behind problem D ?

  • »
    »
    4 years ago, # ^ |
    Rev. 2   Vote: I like it +6 Vote: I do not like it

    u need to find max(a[i]) - min(a[i]) - max(a[i]-a[i-1]) in each query.

»
4 years ago, # |
  Vote: I like it 0 Vote: I do not like it

Can someone explain the statement of Problem B, What does it mean that find the minimum k where k is the maximum j where p[j]<0 ??

  • »
    »
    4 years ago, # ^ |
      Vote: I like it 0 Vote: I do not like it

    last value of index j in the array such that p[j]<0, which is denoted as k , should me minimum. Like: supoose we have n=4 a[]={2,-3,4,-1} l[]={0,0,1,0} so the corresponding sum prefix array will be sum[]={2,-1,3,2}, here max j such that p[j]<0 is j=1 , so k=1. new array such that the condtions are satisfied will be a[]={2,-1,4,-3} Here , sum[]={2,1,5,2} , here max j such that p[j]<0 , is that it does not exist .Accoridng to question , in such cases k=0.So, here answer is k=0 , not k=1 and requires array after rearrangment is a[]={2,-1,4,-3}. I hope this helps and clarifes ur doubt.

»
4 years ago, # |
  Vote: I like it 0 Vote: I do not like it

Auto comment: topic has been updated by awoo (previous revision, new revision, compare).

»
4 years ago, # |
  Vote: I like it +19 Vote: I do not like it

Quick observations for D:

The problem is equivalent to solving the following problem

For a set of points A, find two segments whose union is A and whose combined length is minimal

with updates to A. Unfortunately this is somewhat hard since the optimal assignment of points to segments can change a lot after every update. Fortunately the following problem is much simpler

For a set of points A, find the largest gap between two adjacent elements of A

since updates to A changes the set of gaps by a small amount. The answer to the original problem is max(A) - min(A) - (largest gap between two adjacent elements of A)

  • »
    »
    4 years ago, # ^ |
      Vote: I like it +1 Vote: I do not like it

    I am not getting the intuition. Can you elaborate why it works?

    • »
      »
      »
      4 years ago, # ^ |
        Vote: I like it +3 Vote: I do not like it

      I guess he missed that we need to sort the coordiantes first!

      First sort the coordinates. If we could keep only 1 coordinate(containing all the piles) in the end, the answer will be p[n]-p[1]. But here we can keep 2. So basically we need to select a prefix array p[1..l] ,which denotes our first group and p[l+1..n] the second group, such that p[l]-p[1] + p[n]-p[l+1] is least. Here p[n] & p[1] are always same, the remaining p[l]-p[l+1] is difference between adjacent elements.

»
4 years ago, # |
Rev. 4   Vote: I like it +80 Vote: I do not like it

editorial by tourist.

»
4 years ago, # |
Rev. 3   Vote: I like it -24 Vote: I do not like it

Can someone please help me figure out why this solution for D is resulting in a TLE. Thanks a lot in advance.

Code

Found it: Thanks a lot for the help.

»
4 years ago, # |
  Vote: I like it 0 Vote: I do not like it

Kindly someone explain me the greedy solution to C

»
4 years ago, # |
  Vote: I like it +10 Vote: I do not like it

The quality and accuracy of problems should be taken more seriously than how funny the legends are.

»
4 years ago, # |
  Vote: I like it 0 Vote: I do not like it

Moral of this contest- always think a dp, before you do a greedy, and see if it works with the constraints. Greed is not good.

  • »
    »
    4 years ago, # ^ |
      Vote: I like it +2 Vote: I do not like it

    It is the opposite. Always consider the simpler solution first.

    • »
      »
      »
      4 years ago, # ^ |
        Vote: I like it 0 Vote: I do not like it

      Would you suggest to go for a greedy solution first although it's not sure to work? Problem C for example. Would you do greedy or dp?
      Dp is sure to give the correct answer whereas greedy might fail.

      • »
        »
        »
        »
        4 years ago, # ^ |
        Rev. 3   Vote: I like it -8 Vote: I do not like it

        1) Well, of course you shouldn't code greedy if it doesn't work, but it makes sense to consider it first

        2) I solved C with greedy...

        • »
          »
          »
          »
          »
          4 years ago, # ^ |
            Vote: I like it +1 Vote: I do not like it

          Actually, many have a "confusion" about dp and greedy problems. Some find it difficult to distinguish between dp and greedy problems or judge the way solution would work.

          Is there something that could help us predict that a problem is to be solved using dp or geedy? Although many times, we can FEEL it, but we can't express it in words why it's a dp or greedy.

    • »
      »
      »
      4 years ago, # ^ |
        Vote: I like it 0 Vote: I do not like it

      I think one should go for dp. DP solution is simpler than the greedy one because its difficult to prove the greed.

  • »
    »
    4 years ago, # ^ |
      Vote: I like it +20 Vote: I do not like it

    Don't trust this guy

»
4 years ago, # |
  Vote: I like it 0 Vote: I do not like it

I have solved C using DP, can someone provide me the logic for the greedy solution.

  • »
    »
    4 years ago, # ^ |
    Rev. 3   Vote: I like it 0 Vote: I do not like it

    Let the friend kill the first boss(and second if it's easy), number of skips will be updated accordingly. Now it's your turn to kill. For every island of 1's (groups of consecutive 1's) the number of skips the friend will need are SizeOfIsland/3 as for every 3 consecutive 1's the friend has to skip at least 1 of them. Let's take an example, input = 10111011111, your friend kills bosses at index (0,1,4,5,8).Two of these were easy so total number of skips = 3 (He will never kill two hard bosses in one turn, it's always better to kill one and end his turn). Take other cases and see that it works. Have a look at my submission. 92823703

»
4 years ago, # |
  Vote: I like it -29 Vote: I do not like it

Why Unrated!!!We can just extend the length of the contest

  • »
    »
    4 years ago, # ^ |
      Vote: I like it -11 Vote: I do not like it

    Hey,bros,why down vote . I just express mine and many guys'

»
4 years ago, # |
Rev. 2   Vote: I like it +3 Vote: I do not like it

Sol. Link for Problem-C — https://mirror.codeforces.com/contest/1418/submission/92829566 In this Solution's test details , it is written that it fails on 55th I/P but 55th I/P is not showing. Please provide a test-case where this greedy solution fails.

»
4 years ago, # |
  Vote: I like it +4 Vote: I do not like it

Third problem was really a must do for someone struggling with dp.

»
4 years ago, # |
  Vote: I like it +2 Vote: I do not like it

Nice set of questions . No worries, we are eagerly waiting for the upcoming educational rounds . Cheers to your hard work ...

»
4 years ago, # |
Rev. 2   Vote: I like it 0 Vote: I do not like it

[Deleted]

  • »
    »
    4 years ago, # ^ |
      Vote: I like it +8 Vote: I do not like it

    If you look at the top it says "recent actions". This includes new comments/blog revisions as well.

  • »
    »
    4 years ago, # ^ |
      Vote: I like it -8 Vote: I do not like it

    It's public outcry, I think

»
4 years ago, # |
Rev. 3   Vote: I like it -17 Vote: I do not like it

[deleted]

»
4 years ago, # |
  Vote: I like it +5 Vote: I do not like it

It is very sad that after great effort these problems were invented and prepared by inventors, the result is:

Spoiler

I hope in the future there will be testers for Educational Codeforces Round!

»
4 years ago, # |
  Vote: I like it +21 Vote: I do not like it

As a compensation can you give me the contact number of the trader which gives me 10^9 stick in exchange of 1 stick.

»
4 years ago, # |
  Vote: I like it +6 Vote: I do not like it

A contest announcement with most downvote ?

»
4 years ago, # |
Rev. 2   Vote: I like it 0 Vote: I do not like it

Hi awoo , is there any possibility that you post the editorial? I actually liked the problems and I'd love to learn more from the problems.

Thanks

»
4 years ago, # |
  Vote: I like it -63 Vote: I do not like it

Every contest should be rated. As situation is same to every contestant.

»
4 years ago, # |
  Vote: I like it 0 Vote: I do not like it

Auto comment: topic has been updated by awoo (previous revision, new revision, compare).

»
4 years ago, # |
  Vote: I like it -14 Vote: I do not like it

Anyway, your problems are very good, cheers!

»
4 years ago, # |
  Vote: I like it -13 Vote: I do not like it

Why too much down vote ? Take the issue as simple. You should be thankful for the testers and setters.

»
4 years ago, # |
  Vote: I like it 0 Vote: I do not like it

It was always interesting for me, why people downvote announcements of unrated contests? People gave you some tasks, contest was unrated but why they should have negative contribution because you are angry?

Everyone wants to have contest often, but you should accept the risk of unrated contest and react normally, not just pressing downvote button.

  • »
    »
    4 years ago, # ^ |
      Vote: I like it +9 Vote: I do not like it

    imagine getting free interesting practice problems and get mad about it because they don't give you some internet point.

    • »
      »
      »
      4 years ago, # ^ |
        Vote: I like it 0 Vote: I do not like it

      It's not like there is shortage of practice problems on the internet and on codeforces in particular.

      People who registered for the contest obviously wanted, you know, a contest. And this part was ruined. Moreover it was not ruined because of something unpredictable like a sudden outage of servers, but because of terrible organization. If this contest doesn't deserve downvotes, then I don't know which one does.

      • »
        »
        »
        »
        4 years ago, # ^ |
          Vote: I like it -13 Vote: I do not like it

        imagine thinking a contest is a ruin because it doesn't give you some internet point

      • »
        »
        »
        »
        4 years ago, # ^ |
          Vote: I like it 0 Vote: I do not like it

        But surely the one who made the questions doesn't deserve downvotes does he

        • »
          »
          »
          »
          »
          4 years ago, # ^ |
          Rev. 2   Vote: I like it 0 Vote: I do not like it

          Well, it may be not their fault, but people evaluate the contest as a whole, not the tasks.

»
4 years ago, # |
  Vote: I like it +8 Vote: I do not like it

btw, whose alt account is top 1?

»
4 years ago, # |
  Vote: I like it +7 Vote: I do not like it

Mistakes happen.No need to feel sorry, the problems were really interesting. :)

»
4 years ago, # |
  Vote: I like it +1 Vote: I do not like it

Sorry, I'm new. When the round is unrated it means that the contest doesn't count in your personal rating?

»
4 years ago, # |
  Vote: I like it 0 Vote: I do not like it

Solution to Problem C Mortal Combat Tower in youtube video.

»
4 years ago, # |
  Vote: I like it 0 Vote: I do not like it

Trash problem is really trash.

Can anyone explain how 5 is coming as the output of this 1 2 6 8 10?

  • »
    »
    4 years ago, # ^ |
      Vote: I like it 0 Vote: I do not like it

    they will choose the points 2 and 6

    10, 8 and 6 will go to 6 and this will cost 4 moves, 1 and 2 will go to 2 and this will cost 1 move

    the total moves = 5

    btw this's one of the best problems I ever seen and it's very helpful

    • »
      »
      »
      4 years ago, # ^ |
        Vote: I like it 0 Vote: I do not like it

      We have to find min. number of moves.

      So i'll move 6 to 8, cost=1.(moving x to x+1 will result in 1 move) moving 10 to 8, cost=1.(moving x to x-1) moving 1 to 2, cost=1.(moving x to x+1)

      overall cost should be 3. WHY 5?

      • »
        »
        »
        »
        4 years ago, # ^ |
          Vote: I like it 0 Vote: I do not like it

        Please tell me that you're joking, did you even know that 1+1 = 2 ?

        Moving 6 to 8 needs 2 moves, 10 to 8 also 2 moves, finally 1 to 2 needs 1 move.

        The total moves = 5 !!!