KAN's blog

By KAN, 4 years ago, translation, In English

Hi everyone!

The Final Round of Technocup 2021 starts this Sunday, March 21, 2021 at 13:00 MSK (10:00 UTC)!

For those who want to compete on the same problems, we will hold two regular Codeforces Rounds in the evening: one for the first division, and another one for the second. The rounds are starting at Mar/21/2021 16:20 (Moscow time).

If you are a participant of the official Technocup Finals, you are not allowed to take part in the rounds in the evening. We ask participants of the official Finals not to discuss the problems in open media till evening.

The problems are prepared by: Alexander Golovanov399 Golovanov, Evgenii amethyst0 Belykh, Andrey AndreySergunin Sergunin, Alexey Aleks5d Upirvitskiy, Diego Diegogrc Garcia and me.

Also huge thanks to Bench0310, kokokostya, Um_nik, dorijanlendvaj, brunomont, Stepavly, antontrygubO_o, JinhaiChen, budalnik, wucstdio, golikovnik, kuviman, dantrag, BledDest, Supermagzzz, JettyOller, geranazavr555, divanik, psevdoinsaf, Roms for testing and invaluable comments, and also to antontrygubO_o for the help in holding the mirror rounds.

Good luck!

Congratulations to winners of Codeforces Rounds!

Div. 1:

  1. ecnerwala
  2. Radewoosh
  3. Benq
  4. mango_lassi
  5. AliShahali1382

Div. 2:

  1. qwqc
  2. gezlik
  3. yanyutao
  4. fengqiyuka
  5. ykl

Thanks for participation! Editorial.

  • Vote: I like it
  • +368
  • Vote: I do not like it

| Write comment?
»
4 years ago, # |
  Vote: I like it +132 Vote: I do not like it

You missed " Notice the unusual timing "

»
4 years ago, # |
  Vote: I like it -27 Vote: I do not like it

Hoping for strong sample tests this time ;)

»
4 years ago, # |
  Vote: I like it +256 Vote: I do not like it

  • »
    »
    4 years ago, # ^ |
      Vote: I like it 0 Vote: I do not like it

    dude ur timeline is chaotic , can u tell desired rank to get to 1400+

    • »
      »
      »
      4 years ago, # ^ |
        Vote: I like it +1 Vote: I do not like it

      1400

    • »
      »
      »
      4 years ago, # ^ |
        Vote: I like it 0 Vote: I do not like it

      Depends on how many participants participating in the round generally you need to be in the top 20% maybe and it differs when it's div 1+2 just being in top 30% would get you to specialist easily

»
4 years ago, # |
  Vote: I like it +35 Vote: I do not like it

Is the official Technocup round (not the Div 1/2) rated? (not a bait question, genuinely curious)

  • »
    »
    4 years ago, # ^ |
      Vote: I like it +4 Vote: I do not like it

    Should be, all previous finals was rated

    • »
      »
      »
      4 years ago, # ^ |
        Vote: I like it +2 Vote: I do not like it

      The official contest is in a group rather than on the main CF contests page which is why I was wondering...

    • »
      »
      »
      4 years ago, # ^ |
        Vote: I like it 0 Vote: I do not like it

      That answered my question I guess, goodbye Master.

»
4 years ago, # |
  Vote: I like it +38 Vote: I do not like it

3 contests a day. Gonna be rough. - Kickstart - CF - Cookff

»
4 years ago, # |
Rev. 2   Vote: I like it +2 Vote: I do not like it

AtCoder Regular Contest 115 — 5 PM (UTC + 6)
CF DIV 1/2 — 7.10 PM (UTC + 6)
MARCH COOK-OFF 2021 — 10 PM(UTC + 6)

»
4 years ago, # |
  Vote: I like it +13 Vote: I do not like it

Last year, the contest was ethical and beautiful. Hope it will be the same this year!

»
4 years ago, # |
Rev. 4   Vote: I like it +40 Vote: I do not like it

Today full of contests will coming...

JOISC 2021 Day2 1p.m. — 6p.m.
AtCoder Regular Contest 115 7.p.m. — 9p.m.
CF Round #709 Div. 2 9.10p.m. — 11.10p.m. (Isn't it used to be 9.05 p.m.? Wondering for it)

I've never participated in so many rounds in one day. It's busy without doubt, and I hope it'll also be a fulfilling and unforgettable day for me...

P.S. UTC+8

  • »
    »
    4 years ago, # ^ |
      Vote: I like it 0 Vote: I do not like it

    You forgot about Google Kick-start!!

»
4 years ago, # |
  Vote: I like it -18 Vote: I do not like it

This round is rated or not...as it's not mentioned anywhere in the announcement ??

»
4 years ago, # |
  Vote: I like it +80 Vote: I do not like it

The Final Round of Technocup 2019 starts this Sunday, on the March 21, 2021 at 13:00 MSK (10:00 UTC)!

Shouldn't it be Technocup 2021?

P.S. If I misunderstand this, can someone please explain it to me?

»
4 years ago, # |
  Vote: I like it +5 Vote: I do not like it

Atcder round will end exactly 10 minutes before the start of this round. Such a productive day

»
4 years ago, # |
Rev. 2   Vote: I like it -8 Vote: I do not like it

Why unusual time though, so as to host it with the actual finals?

»
4 years ago, # |
  Vote: I like it +125 Vote: I do not like it

What is the score distribution for the tasks?

»
4 years ago, # |
  Vote: I like it +62 Vote: I do not like it

How many problems will there be?

»
4 years ago, # |
  Vote: I like it -7 Vote: I do not like it

How Many Problems will be there and problem ratings ???

»
4 years ago, # |
  Vote: I like it 0 Vote: I do not like it

Delayed by 10 minutes

»
4 years ago, # |
  Vote: I like it +6 Vote: I do not like it

Forget to release score distribution and make a 10 mins delay?

»
4 years ago, # |
  Vote: I like it +25 Vote: I do not like it

Come on everyone and good luck!
It's my first time to have a contest!

»
4 years ago, # |
  Vote: I like it 0 Vote: I do not like it

there is a delay!

»
4 years ago, # |
  Vote: I like it -8 Vote: I do not like it

SO now what should i do for next 10 mins of my life?

»
4 years ago, # |
  Vote: I like it +77 Vote: I do not like it

Delay it some more times and the unusual timing will become usual again.

»
4 years ago, # |
  Vote: I like it +3 Vote: I do not like it

what's the scoring distribution of the problems?

»
4 years ago, # |
  Vote: I like it 0 Vote: I do not like it

I guess score distribution is left for surprise.

»
4 years ago, # |
  Vote: I like it 0 Vote: I do not like it

So, the revealing of score distribution is gonna be the latest in codeforces history, lol!!

»
4 years ago, # |
  Vote: I like it +16 Vote: I do not like it

Please don't delay this round more than this, we have to give cc march cookoff as well :( T_T

  • »
    »
    4 years ago, # ^ |
      Vote: I like it +41 Vote: I do not like it

    You know they don't delay it for fun, right?

    • »
      »
      »
      4 years ago, # ^ |
        Vote: I like it +20 Vote: I do not like it

      Yeah mate, I know . My apology for being a bit rude :(

      • »
        »
        »
        »
        4 years ago, # ^ |
          Vote: I like it 0 Vote: I do not like it

        by mistake i locked my wrong solution instead of write due to technical glitch during start of contest will i get points of problem A as there is correct one but locked one is wrong please respond whosoever knows????

        • »
          »
          »
          »
          »
          4 years ago, # ^ |
            Vote: I like it 0 Vote: I do not like it

          Once you locked your solution for A , the next solution of A will not be judged by the judge for competition,instead the judge will just take the response which u submitted just before locking. :-|

»
4 years ago, # |
  Vote: I like it +6 Vote: I do not like it

Why score distribution for this round is not given

»
4 years ago, # |
  Vote: I like it -18 Vote: I do not like it

Literally guys , again 10 minutes what to do for 10 minutes i controlled washroom for the contest Now fucked up !!

»
4 years ago, # |
  Vote: I like it +8 Vote: I do not like it

Every minute seems like an hour now :)

»
4 years ago, # |
  Vote: I like it +15 Vote: I do not like it

Score distribution?

  • »
    »
    4 years ago, # ^ |
      Vote: I like it 0 Vote: I do not like it

    I guess it will be a surprise

»
4 years ago, # |
  Vote: I like it +3 Vote: I do not like it

no notice for unusual timing no score distribution whats going on?

»
4 years ago, # |
  Vote: I like it -19 Vote: I do not like it

iS iT rAtEd?

»
4 years ago, # |
  Vote: I like it +9 Vote: I do not like it

How can someone solve A,B,C within 2 minutes unless they know the problems and the solutions beforehand! Ridiculous!!!

»
4 years ago, # |
  Vote: I like it +90 Vote: I do not like it

wtf?  In two minutes this guy read 3 problems as well as solved them and then coded them.

»
4 years ago, # |
  Vote: I like it +20 Vote: I do not like it

Total solve for each problem not visible on the dashboard(Div2)

»
4 years ago, # |
  Vote: I like it +26 Vote: I do not like it

504 Gateway Time-out

Unrated again?

  • »
    »
    4 years ago, # ^ |
    Rev. 3   Vote: I like it +1 Vote: I do not like it

    Now I face the problem The statement is not available now...

  • »
    »
    4 years ago, # ^ |
      Vote: I like it 0 Vote: I do not like it

    Down only at the beginning. Later it was fine until the end of contest (at least for me).

  • »
    »
    4 years ago, # ^ |
      Vote: I like it -8 Vote: I do not like it

    No, m1/m2/m3 were working fine for the whole round.

    • »
      »
      »
      4 years ago, # ^ |
        Vote: I like it 0 Vote: I do not like it

      But it lacks some useful functionality. E.g. statistics of solved tasks (one can determine which task better to solve next) and hacking (but it was too rare in this round).

      • »
        »
        »
        »
        4 years ago, # ^ |
          Vote: I like it -15 Vote: I do not like it

        Statistics of solved tasks was available in the bottom of the standings page

    • »
      »
      »
      4 years ago, # ^ |
        Vote: I like it 0 Vote: I do not like it

      Idea to make m[X] for all users mandatory during the beginning of the round, e.g. first 30 minutes or so, when most participants upload their A and platform overloads.

»
4 years ago, # |
Rev. 2   Vote: I like it +5 Vote: I do not like it

I am submitting using m3 and not able to see if my solution is submitted or not.

»
4 years ago, # |
  Vote: I like it +53 Vote: I do not like it

It is being unethical and ugly. Again.

»
4 years ago, # |
  Vote: I like it +6 Vote: I do not like it

Hey guys I can't see the statements of the problems now. What's wrong?

»
4 years ago, # |
Rev. 2   Vote: I like it -42 Vote: I do not like it

Toughest Prob B ever!!

  • »
    »
    4 years ago, # ^ |
      Vote: I like it +3 Vote: I do not like it

    B was pretty hard if not familiar with modular arithmetic. C was easier than B for me.

»
4 years ago, # |
  Vote: I like it +12 Vote: I do not like it

MikeMirzayanov There were a few people who read , coded and submitted about 2-3 problmes within a first few minuites, I feel thy already knew the problems. Please do us a favour and disqualify them.

  • »
    »
    4 years ago, # ^ |
      Vote: I like it +38 Vote: I do not like it

    They have been removed.

    • »
      »
      »
      4 years ago, # ^ |
        Vote: I like it +2 Vote: I do not like it

      I submitted A within 7-8 min but the page wasn't loading so I resubmitted it on m1.codeforces. The same code without any change was submitted. Both the submissions passed but the later solution timing was considered and I was given some penalty for two submissions with exact same code. Check it and if possible resolve the rating changes.

      • »
        »
        »
        »
        4 years ago, # ^ |
          Vote: I like it 0 Vote: I do not like it

        bro....I lost around 200 points due to this....

»
4 years ago, # |
  Vote: I like it +6 Vote: I do not like it

Pathetic Contest for me IMO.. No offense to anyone

»
4 years ago, # |
  Vote: I like it +8 Vote: I do not like it

This is the actual power of your speed
Rank 1591 with A solved

Also Rank 9160 with A solved
:D

  • »
    »
    4 years ago, # ^ |
      Vote: I like it 0 Vote: I do not like it

    Yeah before I solved B I was once 3300 while others who only solve A too got rank 500...

»
4 years ago, # |
  Vote: I like it 0 Vote: I do not like it

in problem b when i 1st time submited it gives me RE..i tried to find error but couldnt find it..so i tried to submit the same code added some comment line(because you cant submit same code)..and i got WA for same code..What happening :")?

  • »
    »
    4 years ago, # ^ |
      Vote: I like it +8 Vote: I do not like it

    Submit again , you might get AC :D!

  • »
    »
    4 years ago, # ^ |
      Vote: I like it 0 Vote: I do not like it

    if you have written on c++, it's probably undefined behavior

»
4 years ago, # |
  Vote: I like it 0 Vote: I do not like it

by mistake i locked my wrong solution instead of write due to technical glitch during start of contest will i get points of problem A as there is correct one but locked one is wrong please respond whosoever knows????

»
4 years ago, # |
  Vote: I like it 0 Vote: I do not like it

hardforces!! ( atleast for me don't know about others )

»
4 years ago, # |
  Vote: I like it +23 Vote: I do not like it

Really nice problems, no idea how to solve them though lol

»
4 years ago, # |
  Vote: I like it 0 Vote: I do not like it

I want to clarify 1 one thing,i made submission of problem A at 7 min from m1.codeforces ,and after submitting B from codeforces.com,i saw A has not been marked green ,while its pretests are passed,again i submitted from codeforces.com,then WTF,my score was reduced from 486 to 218,seriously dude,is this fair??

  • »
    »
    4 years ago, # ^ |
      Vote: I like it 0 Vote: I do not like it

    And there is one more strange thing-

    I submitted A and B both in m1.codeforces.com and I found that A didn't mark green(Passed pretests) but B did. Now I'm worried that if I won't get any scores in A :(

  • »
    »
    4 years ago, # ^ |
      Vote: I like it +2 Vote: I do not like it

    Mine is also not marked green. It must be a technical glitch, but you should not submit it again. This problem may be happening with many others.

    • »
      »
      »
      4 years ago, # ^ |
        Vote: I like it 0 Vote: I do not like it

      So you can't resubmit it during the game, right?

      • »
        »
        »
        »
        4 years ago, # ^ |
          Vote: I like it 0 Vote: I do not like it

        You can submit as many times as you want. But you should not, as it leads to increased penalty also.

        And ya, the same code can not be submitted multiple times.

  • »
    »
    4 years ago, # ^ |
      Vote: I like it +1 Vote: I do not like it

    Most recent submission time is taken into account.If pretests are passed and you submitted again then it counts as "Some edge cases striked you ,which now u think your submitted code wouldnt pass system test and thats why u resubmitted" and thats why most recent time is taken into account,it seems.

  • »
    »
    4 years ago, # ^ |
      Vote: I like it 0 Vote: I do not like it

    same :(

  • »
    »
    4 years ago, # ^ |
      Vote: I like it +2 Vote: I do not like it

    Due to technical difficulties, some problems may be shown as unsolved. However, on the tab "My submissions" you still was able to see your submissions.

    • »
      »
      »
      4 years ago, # ^ |
        Vote: I like it +20 Vote: I do not like it

      but I wasn't able to lock the problem for hacking due to that :D

»
4 years ago, # |
  Vote: I like it +15 Vote: I do not like it

I submitted A at 14 minutes 50 second and italso passed pretests, but it doesn't show green colour and option to lock in Dashboard. Though, it is there for other 3 problems.

»
4 years ago, # |
  Vote: I like it +26 Vote: I do not like it

Problem D: fix a source vertex $$$u$$$ and let $$$M = \max_v l$$$ over all triples $$$(u, v, l)$$$. Add an $$$(n+1)$$$-th dummy vertex to the graph, and for each triple $$$(u, v, l)$$$ add an edge from $$$v$$$ to the dummy vertex with weight $$$M - l$$$. Now an edge is useful if it is in a path of length at most $$$M$$$ from $$$u$$$ to the dummy vertex. Now the problem reduces to doing two Dijkstra's (one from $$$u$$$, one from the dummy vertex) and checking each edge. Since the graph is complete in the worst case, it was best to implement the $$$O(n^2)$$$ version of Dijkstra (heap-based version gave TLE for me). Final runtime $$$O(n^3)$$$.

  • »
    »
    4 years ago, # ^ |
      Vote: I like it 0 Vote: I do not like it

    I used a somewhat different approach with the same complexity and was hitting some MLE problems because of heap instead of TLE.

  • »
    »
    4 years ago, # ^ |
      Vote: I like it +26 Vote: I do not like it

    Why not Floyd?

»
4 years ago, # |
  Vote: I like it -21 Vote: I do not like it

KAN What the hell is pretest 16 in D?

»
4 years ago, # |
  Vote: I like it +6 Vote: I do not like it

How to do div2D?

  • »
    »
    4 years ago, # ^ |
      Vote: I like it 0 Vote: I do not like it

    can you explain div2 B,C?

  • »
    »
    4 years ago, # ^ |
      Vote: I like it 0 Vote: I do not like it

    Each elements is only removed at most once. Therefore, we keep two std::sets, one to keep track of the remaining elements, and one that keeps candidates for deletion. When deleting a vertex, we can do so by an upper_bound operation on the second set, update the next vertex that is not deleted.

    Complexity: $$$O(n \log n + n \log max(a))$$$.

    Code: 110638935

»
4 years ago, # |
  Vote: I like it -8 Vote: I do not like it

Is it rated ?

»
4 years ago, # |
  Vote: I like it +10 Vote: I do not like it

I literally wrote some random shit in C and it passed pretests. Waiting for fst :(

»
4 years ago, # |
  Vote: I like it 0 Vote: I do not like it

How to solve div2 B and C?

  • »
    »
    4 years ago, # ^ |
    Rev. 5   Vote: I like it +3 Vote: I do not like it

    Problem B

    If there is a solution, then, for all i > 1:

    If ai-1 <= ai then ai - ai - 1 = c

    If ai-1 > ai then ai - ai - 1 = c - m.

    Let c1 = ai - ai - 1

    If the values of c or c1 are inconsistent for different values of i then there is no solution.

    If either is unknown (i.e. the array is monotonically increasing or decreasing) then any value of m works.

    Otherwise the only possible value of m is c - c1. If this is greater than the biggest value in the array it is the solution; if it isn't then there is no solution.

    • »
      »
      »
      4 years ago, # ^ |
        Vote: I like it 0 Vote: I do not like it

      How did you arrive at : If $$$a_{i-1}$$$ $$$>$$$ $$$a_i$$$ then $$$a_i - a_{i-1}$$$ = $$$c - m$$$ $$$?$$$

      • »
        »
        »
        »
        4 years ago, # ^ |
        Rev. 2   Vote: I like it +1 Vote: I do not like it

        ai = (ai-1 + c) mod m

        ai = ai-1 + c - k*m for some integer k >= 0, by definition of mod

        Also 0 <= ai < m

        We know 0 <= ai-1 < m and 0 <= c < m, so

        0 <= ai-1 + c < 2*m

        So 0 <= k*m < 2*m

        So k = 0 or k = 1

        If k = 0 then ai = ai-1 + c

        If k = 1 then ai = ai-1 + c - m

        • »
          »
          »
          »
          »
          4 years ago, # ^ |
            Vote: I like it 0 Vote: I do not like it

          Thanks, I was writing $$$a_i = k*m + a_{i-1} + c$$$.

          Takeaway: $$$ a_i = (a_{i-1} + c)$$$ $$$mod$$$ $$$m$$$ is not the same as $$$a_i \equiv (a_{i-1} + c)$$$ $$$mod$$$ $$$m$$$

»
4 years ago, # |
  Vote: I like it +1 Vote: I do not like it

Any hints for Div2 D ?

»
4 years ago, # |
Rev. 2   Vote: I like it +13 Vote: I do not like it

Duh, I got down to 107 queries in E >_> (worst result after simulating tens of thousands of random tests locally). Is 105 provably optimal (in which case I will admit I was not close) or did I lacked just a few small tweaks :|?

  • »
    »
    4 years ago, # ^ |
      Vote: I like it 0 Vote: I do not like it

    I sincerely hope it wasn't, because otherwise I spent 1.5 hours for nothing :(((((( My approach was to find largest $$$t$$$ s.t. worst case asking $$$(l+r) \cdot t$$$ and always getting lower answer fits in current number of remaining questions. What was yours?

    • »
      »
      »
      4 years ago, # ^ |
        Vote: I like it 0 Vote: I do not like it

      That's what I did as well. I passed pretests (who knows about systests...) by using this approach, running it on an interactor I wrote, and tweaking it in order to maximize the minimum number of queries left on $$$2^{46} - 1$$$, $$$2^{45},$$$ or $$$2^{46}.$$$

    • »
      »
      »
      4 years ago, # ^ |
        Vote: I like it +18 Vote: I do not like it

      On the beginning I tried doubling my budget till I hit first bust ("Fraudster" response). At that point my search space is of form $$$[L, R]$$$, where $$$2L \ge R$$$ (which means that after failed query I can regain a big part of my budget by asking L). Then I try to do skewed binary search. If I ask about midpoint of my interval then no matter what the answer is, I am left with interval of the same length, however in one of these cases I lost a lot of money, so this is probably not the optimal dividing point. I ask about $$$\frac{L \cdot \phi + R}{1 + \phi}$$$ (where $$$\phi = 1.618...$$$). I either end up with a longer interval after gaining money or shorter interval after losing money. Don't ask me why $$$\phi$$$, I just somehow felt it would be good and my experiments confirmed it was a sensible choice.

      • »
        »
        »
        »
        4 years ago, # ^ |
        Rev. 2   Vote: I like it 0 Vote: I do not like it

        I was thinking that something like that might pass, but I was assuming that my apporach is a generalization of your's, therefore I would just write mine. I guess it turns out that my approach suffers greatly because of precision, therefore it didn't work

        upd: turns out $$$(l+r) \cdot t$$$ isn't equivalent to $$$\frac{(l \cdot t + r)}{1 + t}$$$.................

      • »
        »
        »
        »
        4 years ago, # ^ |
          Vote: I like it +13 Vote: I do not like it

        It seems that after raising number of testcases to a few millions my code got up to even 110 queries. However I added an opt suggested to me by kabuszki that if I have a lot of money I can ask closer to half, if I have not a lot, I ask closer to L (I threw in some random constants to quantify this) and after that it doesn't exceed 104 queries on a few millions of cases.

»
4 years ago, # |
Rev. 2   Vote: I like it +25 Vote: I do not like it

How to solve Div 2 E?

  • »
    »
    4 years ago, # ^ |
    Rev. 2   Vote: I like it +32 Vote: I do not like it

    We can do this with DP. Let $$$dp_i$$$ denote the maximum beauty you can get by taking photos of only the first $$$i$$$ buildings and $$$bef_i$$$ indicate the greatest index $$$j < i$$$ such that $$$h_j$$$ < $$$h_i$$$ or $$$-1$$$ if no such $$$j$$$ exists. Now the transitions are quite simple.

    $$$dp_i$$$ = $$$max(\displaystyle\max_{bef_i \leq j < i}dp_j + b_i, dp_{bef_i})$$$

    The first part is when building $$$i$$$ is in a different photo than building $$${bef_i}$$$, and since all buildings in the photo which the building $$$i$$$ is present are taller than it, we will only consider the beauty of this building. The second part corresponds to the case when building $$$i$$$ is in the same photo as $$$bef_i$$$. In this scenario, as all the building after $$$bef_i$$$ are taller than it, none of the buildings there will contribute to the beauty of the photo. You can implement this using segment tree. Also, make sure to handle the case where $$$bef_i = -1$$$

    • »
      »
      »
      4 years ago, # ^ |
        Vote: I like it 0 Vote: I do not like it

      Can you explain what you will be using the segment tree for here?

      • »
        »
        »
        »
        4 years ago, # ^ |
        Rev. 2   Vote: I like it +16 Vote: I do not like it

        For the range max queries in the first part of the $$$dp_i$$$. If implemented naively it might end up with a $$$O(n^2)$$$ complexity. You can use a segment tree or you can use a stack as mentioned in the below comment.

    • »
      »
      »
      4 years ago, # ^ |
        Vote: I like it 0 Vote: I do not like it

      I think it should be max( max ... )

    • »
      »
      »
      4 years ago, # ^ |
      Rev. 2   Vote: I like it +11 Vote: I do not like it

      Thanks for your solution.

      I implemented it without segment tree: maintain a monotonic stack. After each operation, the last item in stack stores $$$(i, \displaystyle\max_{bef[i] \leq j < i}dp_j)$$$, the second to last item stores $$$(bef[i], \displaystyle\max_{bef[bef[i]] \leq j < bef[i]}dp_j )$$$, and so on. It can reduce complexity to $$$O(n)$$$.

      Core code
»
4 years ago, # |
  Vote: I like it +5 Vote: I do not like it

Today at starting site was again too slow and when i submitted A it does't reflect in submission so I opened lightweight version of CF and submitted there but later i came to know previous was also submitted ans 50 points got reducted for resubmission :/

  • »
    »
    4 years ago, # ^ |
      Vote: I like it 0 Vote: I do not like it

    I did the same thing and gained -50 points. My bad :(

»
4 years ago, # |
  Vote: I like it 0 Vote: I do not like it

Can anybody give me some hints for B.

  • »
    »
    4 years ago, # ^ |
    Rev. 2   Vote: I like it 0 Vote: I do not like it

    This one passed pretests. Nothing much to explain.

    Spoiler
  • »
    »
    4 years ago, # ^ |
      Vote: I like it +1 Vote: I do not like it

    Hint: If an array is valid, then every subsequent difference d=a[i]-a[i-1] will be c if d is positive, and m-c if d is negative.

    • »
      »
      »
      4 years ago, # ^ |
        Vote: I like it 0 Vote: I do not like it

      What about if the array has only negative delta, ie all steps are decreasing?

      • »
        »
        »
        »
        4 years ago, # ^ |
          Vote: I like it 0 Vote: I do not like it

        then m can be largest possible

        • »
          »
          »
          »
          »
          4 years ago, # ^ |
            Vote: I like it 0 Vote: I do not like it

          Example, a[]={ 5, 4, 2 }

          Which c, m would make this work?

          • »
            »
            »
            »
            »
            »
            4 years ago, # ^ |
              Vote: I like it 0 Vote: I do not like it

            won't work. 4 — 5 != 2 — 4

          • »
            »
            »
            »
            »
            »
            4 years ago, # ^ |
              Vote: I like it 0 Vote: I do not like it

            Suppose array is decreasing, then a[i — 1] — a[i] = di. And di is same for is i(otherwise answer will be -1), di > 0. Now d = di(any). also, d = m — c. Here m can be any value, c can have any value because d > 0. (so c can have value of [0, m — 1]). So we can any pair of m, c. So finally answer will be 0.

      • »
        »
        »
        »
        4 years ago, # ^ |
          Vote: I like it 0 Vote: I do not like it

        It's still true. The next observation is that if either all are negative, all are positive, or all are 0, then there are no restrictions on m.

        • »
          »
          »
          »
          »
          4 years ago, # ^ |
          Rev. 2   Vote: I like it 0 Vote: I do not like it

          I couldn't solve the problem when array has only negative delta For example if the array is 10,8,6,2 like this.

          • »
            »
            »
            »
            »
            »
            4 years ago, # ^ |
              Vote: I like it 0 Vote: I do not like it

            In that case, if adjacent differences are equal the answer is 0, otherwise -1.

    • »
      »
      »
      4 years ago, # ^ |
      Rev. 2   Vote: I like it 0 Vote: I do not like it

      if d is negative, then why can't 2m-c, 3m-c or in general, Zm-c also one of the possibilities?

      • »
        »
        »
        »
        4 years ago, # ^ |
          Vote: I like it 0 Vote: I do not like it

        In our case, the difference between every consecutive number will have magnitude at most m (since each number is between 0 and m-1). c<m so every possibility you listed has magnitude more than m.

»
4 years ago, # |
  Vote: I like it +167 Vote: I do not like it

The lightweight websites m1, m2, m3 were a bit too lightweight this time...

Spoiler
  • »
    »
    4 years ago, # ^ |
    Rev. 2   Vote: I like it 0 Vote: I do not like it

    Same happened with me, but when I reloaded CF official page, it worked.

»
4 years ago, # |
  Vote: I like it -9 Vote: I do not like it

Such hard problems.

»
4 years ago, # |
  Vote: I like it +1 Vote: I do not like it

This contest was brutal(Donno about others but for me it was).. T_T :(

  • »
    »
    4 years ago, # ^ |
      Vote: I like it 0 Vote: I do not like it

    I always like these type of contests which is based on some contests. They usually contain nice problems.

    • »
      »
      »
      4 years ago, # ^ |
        Vote: I like it +1 Vote: I do not like it

      Obviously problems were nice, but this type of nice problemset is inversely proportional to +delta. (atleast for me) T_T.

»
4 years ago, # |
  Vote: I like it 0 Vote: I do not like it

in div 2 e :

for 4th sample why answer is 96?

if we make photo in this way:

1)1,2,3,4,5

2)6

3)7

4)8,9

5)10

beauty is 100

am i wrong?

»
4 years ago, # |
  Vote: I like it 0 Vote: I do not like it

Why Div. 2 A was so easy?

»
4 years ago, # |
  Vote: I like it +1 Vote: I do not like it

Does submitting two solutions incur a penalty? I don't know how maybe due to server issues my solution got submitted twice to problem A within 9 seconds and got a 50 point penalty. Any idea why?

  • »
    »
    4 years ago, # ^ |
      Vote: I like it +2 Vote: I do not like it

    Yes there is a penalty of 50 points for resubmission. You can message the contest setter telling him/her that it was by mistake you submitted the same code. He/She can help you.

    • »
      »
      »
      4 years ago, # ^ |
        Vote: I like it 0 Vote: I do not like it

      If the code is exactly same, codeforces doesnt allow you to submit.

      • »
        »
        »
        »
        4 years ago, # ^ |
        Rev. 2   Vote: I like it +1 Vote: I do not like it

        I will link to my submissions when codeforces removes the restrictions. Thats why I said it is most likely due to a server side bug. Here are the submissions : Submission1, Submission2

  • »
    »
    4 years ago, # ^ |
      Vote: I like it 0 Vote: I do not like it

    Same thing happened with me

»
4 years ago, # |
Rev. 2   Vote: I like it +17 Vote: I do not like it

My solution for D:

Let $$$w_{uv}$$$ be the weight of the edge between vertex $$$u$$$ and $$$v$$$ (or $$$\infty$$$ if it does not exist), $$$d_{uv}$$$ be the shortest distance of $$$u$$$ and $$$v$$$ (or $$$\infty$$$ similarly), and $$$l_{uv}$$$ be the third element of one of given triplets that forms $$$(u, v, *)$$$ or $$$(v, u, *)$$$ (or $$$0$$$ if such triple does not exist).

For each $$$(u, v)$$$ such that $$$u < v$$$ and $$$w_{uv} < \infty$$$, we want to check if there exists a pair of vertices $$$(a, b)$$$ such that $$$d_{au} + w_{uv} + d_{vb} \leq l_{ab}$$$. This is equivalent to $$${}^\exists a,\; d_{au} + w_{uv} \leq \max_b ( l_{ab} - d_{vb} )$$$. We can precalculate $$$f_{av} := \displaystyle \max_b ( l_{ab} - d_{vb} )$$$ in $$$O(n^3)$$$ time, then check $$${}^\exists a,\; d_{au} + w_{uv} \leq f_{av}$$$ in $$$O(n)$$$ time for each $$$(u, v)$$$. Therefore the problem has been solved in a total of $$$O(n^3)$$$ time.

»
4 years ago, # |
  Vote: I like it +1 Vote: I do not like it

how sad it is when codeforces does not work:(

»
4 years ago, # |
  Vote: I like it +86 Vote: I do not like it

Rounds for children are so bizarre, each time I participate in them it's such a disaster.

The mice cried, pricked, but continued gnawing the cactus...

  • »
    »
    4 years ago, # ^ |
    Rev. 3   Vote: I like it +11 Vote: I do not like it

    From Russian saying.

    Image
    • »
      »
      »
      4 years ago, # ^ |
        Vote: I like it +8 Vote: I do not like it

      Yes, it's from the anecdote where the mice wanted to become hedgehogs, or alternatively from the story in which a real cactus was hurt by hungry mice which weren't able to find some less painful comestibles.

»
4 years ago, # |
  Vote: I like it 0 Vote: I do not like it

Is this round rated?

»
4 years ago, # |
  Vote: I like it +23 Vote: I do not like it

The problem E is a very great problem, especially limited the number of inquiries <= 10^{14} and let my multiplication get TLE(because of invalid queries) Thank you very much!

»
4 years ago, # |
  Vote: I like it +6 Vote: I do not like it

B > C. Just another day at CF.

»
4 years ago, # |
  Vote: I like it 0 Vote: I do not like it

Can't wait for editorial to see the intended solution for Div2 D. I couldn't do it in less than O(n^2)

  • »
    »
    4 years ago, # ^ |
    Rev. 2   Vote: I like it 0 Vote: I do not like it

    I have ~ O(n) solution using vector of deques

    • »
      »
      »
      4 years ago, # ^ |
        Vote: I like it 0 Vote: I do not like it

      would you mind sharing the idea behind it?

      • »
        »
        »
        »
        4 years ago, # ^ |
        Rev. 2   Vote: I like it +1 Vote: I do not like it

        Let's consider sequence p[1], p[2], ..., p[k], where GCD(p[i — 1], p[i]) != 1 for each neighbor pairs. We can store this sequence as a deque. Let's simulate the process and parse the given array into these deques.

        Then we have obvious property: if you delete p[1], you start from p[2] and go until p[k], and for each neighbor pairs GCD is also > 1. We don't need to check it twice, let's just remove the first element from the deque.

        After that let's consider two neighbor deques q and p. If GCD(q.back(), p.front()) != 1, we can merge them(you can use small-to-large to do it more efficiently).

        You can do it while it is possible to remove at least one element. After few operations we'll get one deque, let's consider it as given array and do the same.

        • »
          »
          »
          »
          »
          4 years ago, # ^ |
            Vote: I like it 0 Vote: I do not like it

          That's neat, I regret not being able to solve it

»
4 years ago, # |
Rev. 2   Vote: I like it +1 Vote: I do not like it

geranazavr555 when will codeforces be fully open ?

»
4 years ago, # |
  Vote: I like it 0 Vote: I do not like it

Why is viewing user profiles blocked?

  • »
    »
    4 years ago, # ^ |
      Vote: I like it 0 Vote: I do not like it

    I guess because of techno Cup

    • »
      »
      »
      4 years ago, # ^ |
        Vote: I like it +5 Vote: I do not like it

      And the rationale for this is what?

      • »
        »
        »
        »
        4 years ago, # ^ |
          Vote: I like it 0 Vote: I do not like it

        Maybe because you can look at their solutions since it was a "different" contest.

      • »
        »
        »
        »
        4 years ago, # ^ |
          Vote: I like it +11 Vote: I do not like it

        To avoid leakage of technocup results

»
4 years ago, # |
  Vote: I like it 0 Vote: I do not like it

In Div2 C why it was not given that "nobody is chosen strictly more than " Ceil of m/2...I got wrong thrice on it due to assuming it to be rounded down :(

  • »
    »
    4 years ago, # ^ |
    Rev. 2   Vote: I like it 0 Vote: I do not like it

    I also get confused each time.. Remember in ceil, brackets are curved at top and in floor, they are curved at bottom..

  • »
    »
    4 years ago, # ^ |
      Vote: I like it +3 Vote: I do not like it

    It was mentioned

»
4 years ago, # |
  Vote: I like it +36 Vote: I do not like it

My soln of D -
Let d[u][v] be the shortest distance between u and v.

O(n^4) soln - Let x,y,w be an edge. u,v,l is a triplet.
x,y is good if d[x][u]+w+d[v][y]<=l <=> 0+w+d[v][y]<=l-d[x][u].
Its equivalent to adding (x,v,l-d[x][u]) as new triplet.

You can always remove duplicate triples by keeping the one with has l maximum.
So you can use initial given triplets to generate O(n^2) new triplets.
At last, for each edges just check triplets which have an endpoint common with the edge.

Overall it takes O(n^3).

»
4 years ago, # |
  Vote: I like it +25 Vote: I do not like it

Did someone else use flows on Div2C??

  • »
    »
    4 years ago, # ^ |
    Rev. 2   Vote: I like it +1 Vote: I do not like it

    I did that too. I'm surprised so many people had greedy instead of this solution.

    • »
      »
      »
      4 years ago, # ^ |
        Vote: I like it +5 Vote: I do not like it

      how did you saw other people's solution ..I'm not able to see anyone's solution from standings??(its just loading..)

  • »
    »
    4 years ago, # ^ |
      Vote: I like it 0 Vote: I do not like it

    Yeah! Dinic just worked fine.

    Was reluctant initially to implement as was quite sure it will TLE. Implemented it when the round was about to be over. Funny.

    • »
      »
      »
      4 years ago, # ^ |
        Vote: I like it +7 Vote: I do not like it

      Dinic on bipartite graphs works with complexity $$$O(|E|\cdot\sqrt{|V|})$$$.

  • »
    »
    4 years ago, # ^ |
      Vote: I like it 0 Vote: I do not like it

    Yeah, I'm suprised that the Greedy apprroach work in this problem, my friends say that they use Greedy algo to solve without proof = )

»
4 years ago, # |
  Vote: I like it 0 Vote: I do not like it

A was so easy, everyone signed up for the contest, but the surprise was B. oh shit, contest is not beautiful

»
4 years ago, # |
  Vote: I like it +194 Vote: I do not like it

This really makes me hate myself.

»
4 years ago, # |
  Vote: I like it +128 Vote: I do not like it

div2 C problem: if he has only one friend, how can make other friends offended?

»
4 years ago, # |
  Vote: I like it 0 Vote: I do not like it

Any hints for div2C?

  • »
    »
    4 years ago, # ^ |
      Vote: I like it 0 Vote: I do not like it

    one more

  • »
    »
    4 years ago, # ^ |
    Rev. 2   Vote: I like it -8 Vote: I do not like it

    Greedy works.

    1. Initially, for each day, select any friend available that day.
    2. Let's call the most common friend X. If friend X is chosen more than half the days, iterate over all days where friend X is selected and select any other friend. It can be shown this will not increase the count of any other friend above half. Stop if friend X's count is no longer more than half the days.
    3. If friend X still appears too many times (because there were too many days with no other friend available), it's impossible.
  • »
    »
    4 years ago, # ^ |
      Vote: I like it 0 Vote: I do not like it

    HINT 1:-

    if all friends appear in less than ceil(m/2) ... ans is pretty simple

    HINT 2:-

    if any friend(let's call him x) appear more than ceil(m/2) times then invite this friend for ceil(m/2) times on days and for rest days invite anyone(except the one you invited ceil(m/2) times already). This will automatically obey the condition.

    Now on which days should invite x.

    Invite x on those days in which only he is allowed(let call this num y) and rest on any day in which x is allowed.

    if(y>ceil(m/2) then ans = "NO" ..... It is obvious.

    I hope this helps

  • »
    »
    4 years ago, # ^ |
    Rev. 2   Vote: I like it 0 Vote: I do not like it

    I will try to explain what I did... Firstly I choose those friends whose count in all games (i.e-in all m days) is less than max allowed, Max allowed is ceil(m/2).We can use these friends on all days wherever they are possible because they can all be used at once and it will always be optimal and it will not violate the maximum usage condition. Now you can now take all the friends whose count is greater than max allowed.

    Now the question arises which friend to use and on which days to use. So, for each friend you can choose the days where there are less possibilities and that particular friend is possible on that day.I hope you understand.

    Sorry for my poor grammar.

»
4 years ago, # |
  Vote: I like it 0 Vote: I do not like it

110670278 Can anybody tell me what is wrong in this code. Thank You

»
4 years ago, # |
  Vote: I like it +8 Vote: I do not like it

I pass pretests in C, but why it doesn't turn green nor turn red?

  • »
    »
    4 years ago, # ^ |
      Vote: I like it 0 Vote: I do not like it

    Does it mean FST?

    • »
      »
      »
      4 years ago, # ^ |
        Vote: I like it +8 Vote: I do not like it

      I had same issue with div2A. I got this reply : Some features may be disabled due to hosting Technocup, sorry for that. You got AC for A

  • »
    »
    4 years ago, # ^ |
      Vote: I like it +3 Vote: I do not like it

    Check the standings. For some reason, the problems page is bugged.

  • »
    »
    4 years ago, # ^ |
      Vote: I like it 0 Vote: I do not like it

    Same happened with me for A, when CF was down my same solution was submitted twice, due to which got 50 points penalty ;(

»
4 years ago, # |
  Vote: I like it +9 Vote: I do not like it

bring back the good old codeforces!!!

»
4 years ago, # |
  Vote: I like it +12 Vote: I do not like it

Why haven't system tests started yet?

»
4 years ago, # |
  Vote: I like it +61 Vote: I do not like it

But why does Div2 D/ Div 1 B have to be literal dog shit? It's almost like the people who proposed to let this kind of garbage appear in a Codeforces round don't want anyone to have fun participating it.

»
4 years ago, # |
  Vote: I like it 0 Vote: I do not like it

any hints for ques div2-B ?

»
4 years ago, # |
  Vote: I like it +84 Vote: I do not like it

I have some serious doubts about performance of alan4ik. I don't believe that any purple user is capable of solving B and C significantly faster than all reds (he solved B at 0:03, A at 0:07 and C at 0:16) and this competition being a mirror of Technocup explains pretty well how it was possible

  • »
    »
    4 years ago, # ^ |
      Vote: I like it 0 Vote: I do not like it

    some users in div.2 solved first 3 problems in starting 1 minute of the contest

»
4 years ago, # |
  Vote: I like it -12 Vote: I do not like it

I Encountered some problem while trying to submit problem A, which led to a delay in submit time and a down my ranking in the standing list, and the resulting from it confusion prevented me from focusing on the rest of the issues. Which of you happened to him like this?

»
4 years ago, # |
  Vote: I like it +40 Vote: I do not like it

Please add (n = 1) case to pretest in next contest. TY.

»
4 years ago, # |
  Vote: I like it 0 Vote: I do not like it

Me after FSTing on B : Hey cyan, here I come !

»
4 years ago, # |
  Vote: I like it +2 Vote: I do not like it

Weak pretests are so common now in codeforces.

»
4 years ago, # |
  Vote: I like it 0 Vote: I do not like it

in second test case of div2-B i am getting this result- ''wrong answer Jury has answer to test 34, but participant has not (test case 34)'' what does this mean ?

»
4 years ago, # |
  Vote: I like it 0 Vote: I do not like it

So painful to solve D just three minutes after the end
Yet so lovely that so many people got FST in B

  • »
    »
    4 years ago, # ^ |
      Vote: I like it +1 Vote: I do not like it

    I solved D on 2:14:58

    • »
      »
      »
      4 years ago, # ^ |
        Vote: I like it 0 Vote: I do not like it

      Is your solution a Bruteforce ? What is its time complexity ?

      • »
        »
        »
        »
        4 years ago, # ^ |
          Vote: I like it +3 Vote: I do not like it

        Whenever I delete some index at most I recalculate for 2 value because things change just for this index's next and before indexes currently in the array so I recalculate them.

        We can delete at most N indexes.

        So total complexity is O(N) but I am also using set hence my solution is O(NlogN) but can improve to O(N)

»
4 years ago, # |
  Vote: I like it +99 Vote: I do not like it

I see that the blog is being downvoted. What was wrong with the problems? I've heard that in the statement of D it was unclear whether the pairs are ordered or unordered, but I don't know what else was the fault of authors.

  • »
    »
    4 years ago, # ^ |
      Vote: I like it 0 Vote: I do not like it

    this is at least disrespectful to the author

  • »
    »
    4 years ago, # ^ |
      Vote: I like it +6 Vote: I do not like it

    D2B FSTs is the main reason I guess

  • »
    »
    4 years ago, # ^ |
      Vote: I like it +47 Vote: I do not like it

    My suspicion is that this is largely motivated by the first two Div 2 tasks--A is significantly simpler than past Div 2 A's, and there were a number of ways to attempt B that led to lots of nasty edge cases. That said, I thought the Div 1 set was pretty nicely balanced. It's perhaps a little unfortunate that the range of problems that matters most for the majority of contestants (B/C/D) leaned towards the DS side of things, with the ad hocs placed at A and E, but that doesn't seem like the end of the world to me, and neither B nor C required absurdly nasty implementation.

    Another plausible explanation is that there were a large number of FSTs. I see this as perhaps a more legitimate reason to downvote; FSTing is extremely frustrating and unfair, given that it represents a significant disadvantage over failing pretests in spite of the fact that the root cause of failing pretests and of FSTing is essentially the same (i.e., submitting a buggy solution), and consequentially, I think authors have an obligation to minimize the number of FSTs that occur.

  • »
    »
    4 years ago, # ^ |
    Rev. 2   Vote: I like it -17 Vote: I do not like it

    As far as I check all the problems either in div1/div2 had some people FSTed so I think that's the reason.

    • »
      »
      »
      4 years ago, # ^ |
        Vote: I like it -23 Vote: I do not like it

      Huh? That's actually great. For a long time cf pretests are going in the wrong way. People stopped even caring about their solutions after seeing that the pretests are passed, while they should carefully check their time, memory and time relative to other participants. Pretests are here to help you catch bugs, but you should always be aware of on WA/TLE/RE on systests and be ready to resubmit if your running time on pretests isn't good enough.

      Last times I've seen that after systests my running time sometimes decreases which means that most times all the strongest tests are included in the pretests, which is bad.

      • »
        »
        »
        »
        4 years ago, # ^ |
          Vote: I like it +40 Vote: I do not like it

        Isn't the point to construct as strong pretests as possible? I think pretests are here just to reduce the load on the judging servers, not to force participants to reread / test their solution after passing pretests.

        • »
          »
          »
          »
          »
          4 years ago, # ^ |
            Vote: I like it +7 Vote: I do not like it

          Actually I've never thought about pretests from this points of view, but probably this is the actual reason.

          Anyway, for me it always was another interesting feature of cf contests in comparison to other platforms, so I would've liked more tasks with weak pretests to make competition more interesting.

»
4 years ago, # |
  Vote: I like it +2 Vote: I do not like it

Is the contest still rated? please, let me know.

»
4 years ago, # |
Rev. 2   Vote: I like it +10 Vote: I do not like it

how n=1 is not in the pretest?

  • »
    »
    4 years ago, # ^ |
      Vote: I like it 0 Vote: I do not like it

    it literally took me 1 minute to detect my error :(

»
4 years ago, # |
  Vote: I like it +12 Vote: I do not like it

is CF-predictor working ??

  • »
    »
    4 years ago, # ^ |
      Vote: I like it 0 Vote: I do not like it

    Nope. You can't visit other's ids. Maybe it is the case for the api as well. Cf tool must have stopped too i guess.

    • »
      »
      »
      4 years ago, # ^ |
        Vote: I like it 0 Vote: I do not like it

      any reason for that

      • »
        »
        »
        »
        4 years ago, # ^ |
          Vote: I like it 0 Vote: I do not like it

        I am not exactly sure how cf-predictor works but it should have to fetch some data for your account. Since visiting ids was blocked by cf till some moments ago, cf-predictor was not working. It should be working now though.

»
4 years ago, # |
  Vote: I like it 0 Vote: I do not like it

What should be output for this TC in Div2B 3 4 2 0

  • »
    »
    4 years ago, # ^ |
      Vote: I like it +1 Vote: I do not like it

    -1

    • »
      »
      »
      4 years ago, # ^ |
        Vote: I like it 0 Vote: I do not like it

      Is this same case ? 3 829404334 757138662 684872990

      • »
        »
        »
        »
        4 years ago, # ^ |
          Vote: I like it 0 Vote: I do not like it

        nevermind i was wrong

        if n=3

        4 2 0 should give 2 4

        • »
          »
          »
          »
          »
          4 years ago, # ^ |
          Rev. 2   Vote: I like it 0 Vote: I do not like it

          c should be less than m

          Edit — if opp case then arr[1]!=m

          • »
            »
            »
            »
            »
            »
            4 years ago, # ^ |
              Vote: I like it 0 Vote: I do not like it

            actually .. my first comment was right it shoud give -1 as for the second case it should give -1 too

  • »
    »
    4 years ago, # ^ |
      Vote: I like it +1 Vote: I do not like it

    It should be 0. c = m-2 and m can be very large

»
4 years ago, # |
  Vote: I like it +2 Vote: I do not like it

For div1A/div2C:

I used Dinic to solve it, modeling a graph with Source that gives (M+1)/2 to "left-side" nodes(that represents "friends"), adding an edge (of weight 1) to "right-side" nodes (that represents days) when that friend could be used on that day. Then i joined the "days" with SNK (weight 1) and run maxflow.

Anyone knows if it can work with Edmond-Karp or some Matching algorithm?

  • »
    »
    4 years ago, # ^ |
      Vote: I like it +10 Vote: I do not like it

    You dont need to struggle that much. Although I dont know matching algos, it can be solved greedily. First go through all the days for which there is only one friend available, take him and increment his count.Then go through all the remaining days, take any person whose count is less than ceil(m/2). If at the end, there is any person with count > ceil(m/2), then print no, otherwise print the result.

  • »
    »
    4 years ago, # ^ |
      Vote: I like it +3 Vote: I do not like it

    Hopcroft Karp algorithm should also fit.

»
4 years ago, # |
  Vote: I like it +8 Vote: I do not like it
  • »
    »
    4 years ago, # ^ |
      Vote: I like it +11 Vote: I do not like it

    How the hell were you able to submit the same code twice? Didn't it give any error?

    • »
      »
      »
      4 years ago, # ^ |
        Vote: I like it 0 Vote: I do not like it

      The second submission is in practice, it seems that the system does not compare contest submissions with practice submissions.

      • »
        »
        »
        »
        4 years ago, # ^ |
          Vote: I like it +1 Vote: I do not like it

        Well, I have no clue why there is run time difference in 2 of your submissions but I want to say that hard-luck buddy! luck wasn't on your side in the contest.

»
4 years ago, # |
  Vote: I like it 0 Vote: I do not like it

I have a doubt. What is the correct size for declaring segment tree ? For problem C (skyline), I declared N as 3e5+5 and seg tree size as 3N. But it gave memory error on test 6. Then When I changed to 4N, it worked. Since the seg tree divides every node by 2, so the max size should not go beyond 2N right ? (N + N/2 +N/4 +... = 2N) ?

  • »
    »
    4 years ago, # ^ |
      Vote: I like it +8 Vote: I do not like it

    Yes, but the indexes of the nodes of the segment tree are for $$$N$$$ being a power of two. Therefore, you should extend $$$N$$$ until the lowest power of two not less than $$$N$$$.

»
4 years ago, # |
  Vote: I like it 0 Vote: I do not like it

I passed div2 A at 0:08 but why did my submission is skipped? I submitted div2 A again after i passed the B,but my A‘s score is not calculateed with the submission i submitted at 0:08。my score is lost!

  • »
    »
    4 years ago, # ^ |
      Vote: I like it 0 Vote: I do not like it

    It wasn't lost. The dashboard was faulty. It didn't show green for A. But it was in the submission page. Then you submitted again. Therefore your previous submission is skipped.

»
4 years ago, # |
  Vote: I like it +3 Vote: I do not like it

How to see the probable rating change before the end of the round?

»
4 years ago, # |
  Vote: I like it +21 Vote: I do not like it

To not keep you waiting, the ratings updated preliminarily. We will remove cheaters and update the ratings again soon!

  • »
    »
    4 years ago, # ^ |
      Vote: I like it +3 Vote: I do not like it

    So,will the rating changes be rolled back ?

»
4 years ago, # |
  Vote: I like it +34 Vote: I do not like it

Finally.... reached expert today :)

»
4 years ago, # |
  Vote: I like it 0 Vote: I do not like it

in Proplem B Div 2

When can I say that the condition takes a value of 0?

  • »
    »
    4 years ago, # ^ |
      Vote: I like it 0 Vote: I do not like it

    In three cases:

    1) whole array is increasing (with the same difference between adjacent values)(like: 1,3,5,7)

    2) whole array consists only one integer (like: 1,1,1,1)

    3) whole array is decreasing (with the same difference between adjacent values)(like: 7,5,3,1)

    if the difference is not same in case 1 and 3 then answer will be -1

»
4 years ago, # |
  Vote: I like it 0 Vote: I do not like it

when will ratings be updated ?

»
4 years ago, # |
  Vote: I like it +15 Vote: I do not like it

anyone getting notifications that someone wrote something ?

»
4 years ago, # |
  Vote: I like it 0 Vote: I do not like it

div 1.5 i guess

»
4 years ago, # |
Rev. 2   Vote: I like it 0 Vote: I do not like it

How to solve Div2D / Div1B?

  • »
    »
    4 years ago, # ^ |
      Vote: I like it 0 Vote: I do not like it

    My solution is following. Notice that we will remove at most N numbers. So, if we can "fast" search next and remove it, then time complexity is O(n * (single_search+single_remove)). How can we remove element? You can do it with double-linked list or using set. How to find next pair? Let's maintain set of all indices of consecutive gcd = 1. Then, we need to find among all indices next from current position. In c++ you can do it with set and lower_bound. Or you could write segment tree. Probably there some other ways. When you delete number make sure you also remove all corresponding gcd = 1, and add new ones.

»
4 years ago, # |
  Vote: I like it 0 Vote: I do not like it

In DIV2 A and B, what arguments or justification you used while reaching to the solution ? Like what was your lane of thought .

  • »
    »
    4 years ago, # ^ |
    Rev. 2   Vote: I like it +3 Vote: I do not like it

    In Div2A we can think of a cell as a vertex in a graph and a broken wall as an edge. Let's also assume that there's a vertex that represents "outside of the prison". Then, the task is to find the minimum number of edges that a connected graph can have. In other words, the graph we're looking for is a tree which has n-1 edges. Including our "imaginary" vertex (because there must exist a connection with the "outside"), n = a * b + 1 so the number of edges is a * b.

  • »
    »
    4 years ago, # ^ |
      Vote: I like it +8 Vote: I do not like it

    A: You can think of (a*b) cells + 1 outside as components of a disjoint set. Opening any wall means joining two componenets. As we need to merge a*b + 1 components to 1 we need at least a*b wall breaks. Then you can easily create a solution which satisfies this for eg. breaking the bottom wall of each cell.

    B: If the array satisifies a generator there can be only two cases for each pair of adjacent elements: a[i] >= a[i-1] and a[i] = a[i-1] + c, and a[i] < a[i-1] and a[i] = (a[i-1] + c — m).
    After checking that each case has only one difference in it, you need both these cases occuring to fix one (m,c) pair else m can be arbitrarily large.

»
4 years ago, # |
  Vote: I like it +5 Vote: I do not like it

Getting error 'You are not allowed to view the contest' when trying to open Div2 contest (ID 1484). Please fix, I'd like to look at the problem statements again.

MikeMirzayanov KAN

»
4 years ago, # |
  Vote: I like it 0 Vote: I do not like it

I found out that the link to the div 2 round is not working. It said that I am not allowed to view such contest! Please fix it. @MikeMirzayanov

»
4 years ago, # |
  Vote: I like it +21 Vote: I do not like it

When can we view others' code?

»
4 years ago, # |
  Vote: I like it 0 Vote: I do not like it

It seems the prompt for Div2 Problem B was misleading. It said that c is nonnegative and that a[i] = a[i-1] + c. That led me to conclude that arrays that are monotonically decreasing have no solution, but that doesn't seem to be the case based on some of the comments (Codeforces is not currently allowing access to the div2 problems so I can't check the testcases I missed).

»
4 years ago, # |
  Vote: I like it +3 Vote: I do not like it

Codeforces Round #709 (Div.1 only)

»
4 years ago, # |
  Vote: I like it 0 Vote: I do not like it

Is there a reason why problems A,B in Div.2 cannot be viewed?

»
4 years ago, # |
  Vote: I like it 0 Vote: I do not like it

Can anyone please explain how to solve DIV2 C (DIV1 A) using flow?

  • »
    »
    4 years ago, # ^ |
      Vote: I like it +1 Vote: I do not like it

    The problem can be reduced to finding the maximum bipartite matching of the friends with the days, restricting the capacity from the source to each friend to (m+1)/2.

  • »
    »
    4 years ago, # ^ |
      Vote: I like it 0 Vote: I do not like it

    Dude, why do you implement flows to solve this simple problem? Anyways using flows will most probably give TLE.

    • »
      »
      »
      4 years ago, # ^ |
        Vote: I like it +8 Vote: I do not like it

      I'm not sure if greedy will work if constraints were changed to m/4 or m/3. Also I cannot prove if greedy is always correct, it's just seems intuitively correct because of large constraints.

      • »
        »
        »
        »
        4 years ago, # ^ |
          Vote: I like it +1 Vote: I do not like it

        Greedy works because after any assignment there can only be one invalid friend. Then while greedily reassigning friend during the days where this invalid friend was chosen, there is no possibility that a newly assigned friend will become invalid, because if we consider the frequencies of the previously assigned and newly assigned friends:

        For even m closest case would be: $$$(m/2 + 1,m/2 - 1)$$$ to $$$(m/2,m/2)$$$

        For odd m closest case would be: $$$((m+1)/2 + 1, (m+1)/2 - 2)$$$ to $$$((m+1)/2, (m+1)/2 - 1)$$$.

        In both cases, the invalid friend becomes valid and the valid one stays valid. Of course it woudn't work if the limit was changed, that was the point of the problem.

        • »
          »
          »
          »
          »
          4 years ago, # ^ |
            Vote: I like it 0 Vote: I do not like it

          Yeah... makes sense, Really appreciate the effort

    • »
      »
      »
      4 years ago, # ^ |
        Vote: I like it 0 Vote: I do not like it

      can we use dp, where we maintain the frequencies of the friends in a map and for each day if the frequency is less than ceil(m/2) then we push it and call the next day recursively? and we end it when the call has an empty list of list of friends ?

      • »
        »
        »
        »
        4 years ago, # ^ |
          Vote: I like it 0 Vote: I do not like it

        Hey, I just did it using the same way, but getting WA, could you please help me in telling the case I am missing. IMO I don't think you need more than two friends to come on a single day to get to the answer. Submission: https://mirror.codeforces.com/contest/1484/submission/110655268

        But when it got a WA to me, so I expanded it a bit for checking for all friends. Submission: https://mirror.codeforces.com/contest/1484/submission/110660421

        But I not able to find out the Error.

        • »
          »
          »
          »
          »
          4 years ago, # ^ |
            Vote: I like it 0 Vote: I do not like it

          im getting WA on tc2 for the same reason too, even I wanted to know why dynamic programming is not working in this case.

          • »
            »
            »
            »
            »
            »
            4 years ago, # ^ |
              Vote: I like it 0 Vote: I do not like it

            Ig this is not always optimal. Suppose x and y are available on second last day and only x is available on last day and count of x is (ceil(m/2)-1) and count of y is 0 till third last day.

            So now we should take y on second last day and x on last day for optimal answer. But as per your approach you can end up selecting x on second last day and having no choice on last day.

            • »
              »
              »
              »
              »
              »
              »
              4 years ago, # ^ |
                Vote: I like it 0 Vote: I do not like it

              When I chose x and have no choice on last day , the call comes back negative for the call in which I chose x and the function proceeds to chose y and check again , this tome it will get a true

              • »
                »
                »
                »
                »
                »
                »
                »
                4 years ago, # ^ |
                Rev. 2   Vote: I like it 0 Vote: I do not like it

                I can't access your newest submission. Try the test case commented below. Your earlier submission(which I can access) fails in that case

            • »
              »
              »
              »
              »
              »
              »
              4 years ago, # ^ |
                Vote: I like it 0 Vote: I do not like it

              You should see my submission once again. I am handling the cases with only one person on one day initially. And then checking for others. There won't be any case because we will first check for the day with only one person.

              • »
                »
                »
                »
                »
                »
                »
                »
                4 years ago, # ^ |
                  Vote: I like it 0 Vote: I do not like it

                1

                2 3

                2 1 2

                1 1

                1 1

                Your code gives NO

                But answer should be YES

»
4 years ago, # |
  Vote: I like it +16 Vote: I do not like it

These rating changes don't seem appropriate, is there some extra +ve rating given in the first few contests? , I would like to know more about this...

»
4 years ago, # |
  Vote: I like it +6 Vote: I do not like it

Would you please describe the details of the complexity analysis about Div2. D in editorial?

This problem is still puzzling me.

»
4 years ago, # |
  Vote: I like it 0 Vote: I do not like it

I just realized I got only 438 points for problem A, but I did solve it in under 5 minutes. There are many who took more time and still got more points, is it because I submitted my problem twice? because the first time the server went down while it was in queue.

  • »
    »
    4 years ago, # ^ |
      Vote: I like it 0 Vote: I do not like it

    Submitting multiple times result -50points at each resubmission.

»
4 years ago, # |
  Vote: I like it +8 Vote: I do not like it

where is div2? I cant open it.

»
4 years ago, # |
  Vote: I like it +23 Vote: I do not like it

when to publish the tutorial?

»
4 years ago, # |
  Vote: I like it 0 Vote: I do not like it

can anyone please explain the approach to problem D? i have no clue how to do it..

»
4 years ago, # |
  Vote: I like it 0 Vote: I do not like it

MikeMirzayanov Please update problem rates.

»
4 years ago, # |
  Vote: I like it +23 Vote: I do not like it

Sorry if it's too late, but i think C div.1 can solve using divide and conquer and greedy with a bit more data structures.

See my code : 110746829

  • »
    »
    4 years ago, # ^ |
      Vote: I like it +47 Vote: I do not like it

    Let $$$solve(l, r)$$$ be the answer for segment $$$[l, r]$$$ then you choose the building $$$m$$$ with minimum $$$h_m$$$. You easy calculate it in O(1) if you have the answer for segment $$$[l, m - 1]$$$ and $$$[m + 1, r]$$$. Let's call these answer are $$$left$$$ and $$$right$$$.

    There're two case here:

    1. $$$b_m$$$ contain in the answer then $$$ans = right + left + b_m$$$
    2. $$$b_m$$$ does not contain in the answer, that mean it must be in same picture with $$$l - 1$$$ or $$$r + 1$$$ or both.
    • If $$$l > 1$$$ and it is in same with $$$l - 1$$$ then $$$ans = right$$$.
    • If $$$r < n$$$ and it is in same with $$$r + 1$$$ then $$$ans = left$$$
    • If $$$l > 1, r < n$$$ and it is in same picture with both then $$$ans = 0$$$.

    Take max all of these, and you got the final answer.

»
4 years ago, # |
  Vote: I like it +12 Vote: I do not like it

Any plans to add english editorial authors ?

»
4 years ago, # |
  Vote: I like it +38 Vote: I do not like it

KAN any updates on the english editorial?

»
4 years ago, # |
Rev. 2   Vote: I like it -46 Vote: I do not like it

Thanks to everyone who downvoted my survey is accomplished. Also, thanks to Dragnoid99 to make it possible faster. ORZ community

»
4 years ago, # |
Rev. 2   Vote: I like it +59 Vote: I do not like it

At this point I think I will just try google translating the Russian slides instead of waiting for the editorial.

»
4 years ago, # |
  Vote: I like it +1 Vote: I do not like it

god! Am I the only rookie praying for tutorial?

»
4 years ago, # |
Rev. 5   Vote: I like it +24 Vote: I do not like it

Instead waiting for English tutorials to be posted, i am going to learn russian to speed up the process.

»
4 years ago, # |
Rev. 4   Vote: I like it +8 Vote: I do not like it

Here is the English Editorial version (using Google Translate) of "Slides in Russian" which is attached to the Announcement — Google Translate Version Of Technocup 2021 Final(CF — 709) Editorial .

Hope it helps before the official editorial gets published.
Thank You !

  • »
    »
    4 years ago, # ^ |
    Rev. 2   Vote: I like it +3 Vote: I do not like it

    Sorry, I mistook.

    • »
      »
      »
      4 years ago, # ^ |
      Rev. 3   Vote: I like it +4 Vote: I do not like it

      I am not the editorialist.
      I have just translated the Russian one which is attached to the Announcement using Google Translate and put them in a Document for the curious ones.

      UPD : Glad you understand my point.

»
4 years ago, # |
  Vote: I like it +35 Vote: I do not like it

In case anyone is curious about the solutions to the problems, I wrote up an unofficial editorial for all the problems except Div. 1 F at https://mirror.codeforces.com/blog/entry/88944.

»
4 years ago, # |
  Vote: I like it 0 Vote: I do not like it

please post editorial asap !!

»
4 years ago, # |
  Vote: I like it +10 Vote: I do not like it

I'm not sure why editorial is not out yet, but I was the writer of Div2E/Div1C, so ill post the editorial I had written for the solution I had in mind, hope it helps out.

Solution
»
4 years ago, # |
  Vote: I like it +2 Vote: I do not like it

Thomas had never seen such long delay for editorials

»
4 years ago, # |
  Vote: I like it +8 Vote: I do not like it

Please, upload the editorial. It's been 3 days.

»
4 years ago, # |
  Vote: I like it 0 Vote: I do not like it

It's frustrating to wait so long for the editorial

»
4 years ago, # |
  Vote: I like it 0 Vote: I do not like it

Can the editorial link be posted on the announcement also? KAN

»
4 years ago, # |
  Vote: I like it 0 Vote: I do not like it

How to solve div2F/div1D?