AtCoder Regular Contest 124 Announcement

https://atcoder.jp/contests/arc124/submissions/24552411

3 years ago, # ^ |

It's a greedy strategy... it will make locally "correct", but globally wrong choices. Example:

The correct output is 2. Your program tries to save a common factor of 3 after the first two packs, but this dooms it to a worse final result. The test data was probably not very good if this approach was able to pass 72/73 test cases.

→ Reply

VenomInVein

3 years ago, # ^ |

Can you please check this one out what's wrong here? It passes 72/73 cases as well.

Brief explanation : I am storing all those primes that are divisors of all pairs' at least one number and updating answer for all permutations of those primes. According to the order of primes in each permutation, I am adding a number to the red bag if it has a prime divisor whose exponent is greater than the other pair member. Is there anything wrong with my logic or do I have a bug?

→ Reply

3 years ago, # ^ |

Correct output is 6. Your output is 3. Also, as you may realize, it would TLE on this input, since there are too many relevant primes:

1
58642669 223092870

→ Reply

Liking

3 years ago, # |

How large would the number of divisors of a number be?

I used to assume it was at most $$$\sqrt n$$$.

→ Reply

ZergTricky

3 years ago, # ^ |

It's about $$$O(\sqrt[3]{n})$$$

→ Reply

AquaBlaze

3 years ago, # ^ |

+11

Could you explain how to achieve the $$$\mathcal{O}(N^{1/3})$$$ bound?

→ Reply

punk_tech

3 years ago, # ^ |

← Rev. 2 →

There's actually an exact formula. Number of divisors equals to the multiple of [power degrees of prime factors of the number + 1];

12 = 2^2 * 3^1 — > d(12) = (2+1)*(1+1) = 6

I suppose it can be proven that the maximum number of divisors will have numbers which have each prime multiplied exactly once (2*3*5*7...). The maximum number which we can get like that and won't exceed 10^9 consists of 10 primes so its number of divisors will be 2^10.

→ Reply

Sixpathsguy

3 years ago, # ^ |

← Rev. 2 →

I think I had read somewhere that the number of divisors of a number n can be shown to be asymptotically less than n^eps where eps > 0, for all n > some N.

Therefore, I guess if we are truly exact then we are talking of a kind of "polynomial" of arbitrarily small degree. Maybe that would be kind of logn or (logn)^2 etc ( as it a function which grows slower than n^eps where eps > 0)

Anyway, I think the n^(1/3) bound isn't really a "real" tight bound. Instead, its just probably the best bound which works when dealing with numbers that are in the range we deal with, for our purposes

n < 1e9 or 1e18

→ Reply

oversolver

3 years ago, # |

C with $$$n \leq 50$$$ and TL = 4 sec is the best trolling I ever seen

→ Reply

aman6213

3 years ago, # |

-8

void solve()
{  
    ll n;
    cin>>n;
    vector<ll> a(n),b(n);
    ll x=0,y=0;
    for(ll i=0;i<n;i++)
    {
        cin>>a[i];
       
    }
    for(ll i=0;i<n;i++)
    {
        cin>>b[i];
       
    }
    
    unordered_map<ll , ll> mp;
    for(ll i=0;i<n;i++)
    {
        for(ll j=0;j<n;j++ )
        {
            mp[a[i]^b[j]]++;
        }
    }
   
    set<ll> s;
    
    for( auto i : mp)
    {  if(i.second>=n)
    {
        s.insert(i.first);
    }
    }
    cout<<s.size()<<endl;
    for( auto it=s.begin();it!=s.end();++it)
    {
        cout<<*it<<"\n";
    }
}

LINK Can somebody tell me which cases are missing using above approach in problem B? I got 38xAC and 3xWA

→ Reply

ParthDwivedi

3 years ago, # ^ |

Your code is not giving the correct answer for this test case —

3 1 1 2 3 3 1

Correct answer : 0

Your Answer : 1,2

I think your logic is flawed as you have not accounted for identical elements in the original array.

→ Reply

Talaodi

3 years ago, # |

Applying std::random_shuffle 1000 times makes my fake solution to C pass...

→ Reply

mazihang2022

3 years ago, # |

-8

I don't know if the time complexity of my algorithm is correct. Is there anyone can tell me?

#include<bits/stdc++.h>
#define int long long
using namespace std;

const int maxn=55;
const int inf=1ll<<60;

int gcd(int x,int y) {
	return y==0?x:gcd(y,x%y);
}

int lcm(int x,int y) {
	return x/gcd(x,y)*y;
}

struct Node {
	int x,y;
	Node(int x=0,int y=0):x(x),y(y) {}
	bool operator < (const Node &rhs) const {
		return x==rhs.x?y<rhs.y:x<rhs.x;
	}
};

int a[maxn];
int b[maxn];
set<Node> st[maxn];

signed main() {
	ios::sync_with_stdio(false);
	cin.tie(0),cout.tie(0);
	int n;
	cin>>n;
	for(int i=1; i<=n; i++) {
		cin>>a[i]>>b[i];
	}
	st[0].insert(Node(0,0));
	for(int i=0; i<n; i++) {
		for(auto x:st[i]) {
			st[i+1].insert(Node(gcd(x.x,a[i+1]),gcd(x.y,b[i+1])));
			st[i+1].insert(Node(gcd(x.x,b[i+1]),gcd(x.y,a[i+1])));
		}
	}
	int ans=0;
	for(auto x:st[n]) {
		ans=max(ans,lcm(x.x,x.y));
	}
	cout<<ans;
}

→ Reply

3 years ago, # |

Can anyone explain dp part? That's the most important part in the editorial for E

→ Reply

goingOn

3 years ago, # |

← Rev. 2 →

In B-XOR Matching 2

Why is it sufficient for checking for only n distinct values of X. Shouldn't it be $$$n^2$$$ for different values across a^b where a , b = arrays(a,b) which could be at max $$$n^2$$$

→ Reply

I_Hate_DIV3s

3 years ago, # ^ |

Think it in this way that a[0] can map with b[0] to ..... b[n-1] so we will have n different values of xor (a[0]^b[k]) and hence we need to check for only n possible values because the xor for every pair in each matching needs to be same

Here is my submission

→ Reply

LipArcanjo

3 years ago, # |

Can someone explain how to get the formula $$$ f(n) = g(n) - 2 \sum^{n-1}_{0} g(i)C(n-i-1) $$$ in problem F?

→ Reply

rgnerdplayer

3 years ago, # ^ |

← Rev. 4 →

To get $$$f(n)$$$ you need to subtract from $$$g(n)$$$ all the cases where they met before $$$n$$$. Suppose the LAST time they met before meeting again at $$$n$$$ is after moving right $$$i$$$ times.

Then, both of the animals should move $$$n - i$$$ times right. During this phase the camel should always be strictly faster than the cat (or vice versa). This is known to be $$$C(n -i - 1)$$$. See the lattice paths interpretation of Catalan number: catalan

→ Reply

LipArcanjo

3 years ago, # ^ |

Thanks!! I get it.

→ Reply

3 years ago, # ^ |

Can u explain dp part in the editorial for E ?

→ Reply

3 years ago, # ^ |

Were you able to find the dp for E? Please share if you could find it

→ Reply

3 years ago, # ^ |

I do not have it. In the editorial for E, they just said to use dp to solve without explaining how to use dp ~~~~~

→ Reply

mafailure

3 years ago, # ^ |

In problem E we have to find the number of ways to select exactly 1 ball from each cell for all sequences C such that

C(i)<=a(i) and min(C(1),C(2)....,C(n)) =0.

Please note that we have to consider every ball different from while selecting but we have to consider them identical while transferring ( Since only number of balls transferred matters to us) .

After performing the given operations let's say an index i contains x balls. Some of it (possibly 0) must be in index i-1 originallly. So when we are selecting a ball from this index we can either select a ball that was originally present in index i-1 or a ball that was originally present in ith position.

We can find answer for sequences C such that min(C)=0 by finding Count(Minimum in C is atleast 0)- Count (Minimum in C is atleast 1)

We will write a dp(i,j,k) where,
i represents index of the current position 

j represents whether the ball that we selected for the first place was originally at first place or last place 

k represents whether the ball that we will select for ith place came from i-1th position or ith position.

For position j, 0 represents that the ball we will select for 0th position was originally at 0th position and 1 represents that the ball we will select for 0th position was originally at last position.

For dp(i,j,k) there are 2 transitions dp(i+1,j,0) and dp(i+1,j,1).

If k==0 this means the ball we are going to select for position i was originally in place i and if we are going to transition to dp(i+1,j,0) that means the ball that we are going to select for position i+1 was originally in position i+1. So we don't have to worry about it. Now number of ways to select a ball for this position A(i)-C(i). Since we have to consider every C(i) we can add A(i)-0+A(i)-1+A(i)-2.......... which will result in an Arithmetic Progression.

Similary we can count for each transition very easily.

Final answer that we will return is dp[n][1][1]+dp[n][0][0]. dp[n][0][1] is a wasted state because we initially assumed that the ball that we are selecting for position 0 was originally at position 0. But dp[n][0][1] represents the number of ways such that the ball that we are selecting for position n was intially at position n-1 which contradicts our original assumption.

The final answer will be FIND_ANSWER(0)-FIND_ANSWER(1). where FIND_ANSWER(m) gives answer for all sequences C such that minimum in C is atleast m.

You can refer to semiexp's code for help.

→ Reply

3 years ago, # ^ |

Thank you for your help

→ Reply

3 years ago, # ^ |

can you explain more about dp transform

→ Reply

mafailure

3 years ago, # ^ |

The main problem in writing dp for this probem was the circular nature of array. Since the last element will have an effect on first one and the first one will have a effect on last one as well. So we will initially assume what the last position will be doing. If j=0 then it means the ball selected for position 0 was initially present in 0 else if j=1 then it means the ball selected for position 0 was initially present in 1

For each i and j there are four possible transition :-

dp[i][j][0]-> dp[i+1][j][0]

dp[i][j][0]->dp[i+1][j][1]

dp[i][j][1]->dp[i+1][j][0]

dp[i][j][1]->dp[i+1][j][1]

→ Reply

3 years ago, # ^ |

I got it. Thank you very much for the clear explanation

→ Reply

thangdz2k7

16 months ago, # ^ |

thank youu very muchh !!!

→ Reply

toNmoYy

3 years ago, # |

← Rev. 2 →

I am getting WA in problem B in three testcases.After so much trying i still cant figure out whats wrong .Please help me out.Here is my Submission

→ Reply

rgnerdplayer

3 years ago, # ^ |

remove duplicate numbers in rslt

→ Reply

3 years ago, # |

← Rev. 2 →

-8

Can someone explain, how did we prove that N+M-K+2*max(R,B) is the minimum(for problem D: Yet Another Sorting Problem) from the below argument:

Argument from the official editorial on Atcoder

→ Reply

rgnerdplayer

3 years ago, # ^ |

Why tag me

→ Reply

3 years ago, # ^ |

Thought that you could have helped seeing the other comments on this page.

Sorry for the tag. Removed it now.

→ Reply

3 years ago, # ^ |

This proves a lower bound since if the original list is sorted after $$$j$$$ operations, then

$$$ f(j) = j+N+M-K_j + 2 \max(R_j,B_j) = j + N + M - (N + M) + 2 \max(0, 0) = j, $$$

since there are exactly $$$N + M$$$ components each of size $$$1$$$ in that case. But since $$$f$$$ is increasing and obviously $$$j \geq 0$$$ it must further hold that $$$j = f(j) \geq f(0) = N+M-K_0+2 \max(R_0,B_0)$$$. The editorial then continues by describing a specific strategy that achieves this lower bound and must therefore be optimal.

→ Reply