Topcoder SRM 624 - Codeforces

11 years ago, # ^ |

+15

All problems are brand new, so you can participate.

→ Reply

Zlobober

11 years ago, # |

+27

I've heard that at topcoder it's strictly not recommended to announce your own authorship of the contest, that's why we usually don't know problemsetter until round ends. Won't they blame you in violating their rules?

→ Reply

cgy4ever

11 years ago, # ^ |

+30

Yes, I was told not to reveal the identity until the end of challenge phase in SRMs and TCO rounds. Does this changed now?

btw, It's interesting to see a writer from Brazil while the World Cup is there. I guess the tasks will contain something related to the World Cup. Let's see if I'm right after the contest.

→ Reply

ivan.metelsky

11 years ago, # ^ |

+43

No, this is not changed, but we haven't informed MDantas about that. This is noted, new problem writers will be better informed in future.

→ Reply

11 years ago, # ^ |

I guess the tasks will contain something related to the World Cup.

maybe like this problem? ;)

→ Reply

pedromnasc

11 years ago, # ^ |

No problem about the world cup :(

→ Reply

11 years ago, # ^ |

+32

Quiet, ongoing contest! :D

→ Reply

11 years ago, # ^ |

+47

There's nothing on the TopCoder Writer Contract covering that possibility, at least I didn't see.

→ Reply

IDont_love_TanyaRomanova

11 years ago, # |

How to solve 1000(Div2)?

→ Reply

11 years ago, # ^ |

Contest has not ended yet! Wait a little bit.

→ Reply

Temirulan

11 years ago, # ^ |

Just calculate nim-value for all state's. Read about it here: http://en.wikipedia.org/wiki/Nim

→ Reply

nic11

11 years ago, # ^ |

I solved it the same way, but I think there's a simplier solution. If someone solved it simplier, please tell your solution.

→ Reply

nic11

11 years ago, # ^ |

ashka's solution:

int winner_ashka(int N) {
    bool t = false;
    if (N == 1 || N == 35 || N == 15) t = true;
    int n = N%34;
    if (n == 5 || n == 9 || n == 21 || n == 29 || n == 25) t = true;
    if (t) return 2;
    return 1;
}

How?! o.O

→ Reply

11 years ago, # |

+23

It was like CF div2 CDE.

Almost the same 1000: 342E - Ксюша и дерево

→ Reply

11 years ago, # ^ |

+26

Yes, and it seems that changing module by 2 also radically changes everything in 500:) http://community.topcoder.com/stat?c=problem_statement&pm=10805

Yet anyway, 1000 was hard enough only to be solved by the few, so I guess it is alright.

→ Reply

11 years ago, # ^ |

+13

I'm sure most top contestants know exactly how to solve it (BIT over HLD), it just takes time.

→ Reply

11 years ago, # ^ |

+13

Agreed. It was more of a coding then a thinking task — yet difficult enough.

→ Reply

11 years ago, # ^ |

+11

My $\text{[math]}$ didn't fit in time just a little bit. It could be optimized to $\text{[math]}$ , but I didn't make it.

→ Reply

mugurelionut

11 years ago, # ^ |

I guess your solution is something like: - when a new node is painted blue, add it to a list (if we now have sqrt(Q) nodes in the list then recompute values for the whole tree in O(N) time and clear the list) - for a query: take the answer from the last tree "rebuilding" and then traverse the list of nodes which were recently painted blue, compute the LCA to each of them and add the distance to the answer of the current query.

I implemented this approach but I was getting TLE on the example test cases 4 and 5 (and I only finalized it too close to the end of the coding phase to be able to optimize it in any way). After the coding phase and looking at tourist's solution (which is just what I described above), I realized that my TLE was coming from the recursive traversals of the tree : because of the way the parents were given, the nodes could be traversed simply in ascending/descending order (except for a initial DFS). After replacing the recursive traversals with simple "for" loops I got AC in the Practice room. Maybe the same thing happened to you? Or maybe you just used a value which was too large or too small for "sqrt(Q)"? I used 200 (and I saw in tourist's solution that he used 100).

I waited until now to write this because I was unable to submit my solution in the Practice room yesterday and also earlier today (whenever I tried to compile my solution, it said that the request timed out).

→ Reply

11 years ago, # ^ |

It can be solved in O(N * sqrt(N * log(N))) time, without any data structures.

→ Reply

Petr

11 years ago, # ^ |

How do you solve it without using LCA?

→ Reply

izban

11 years ago, # ^ |

← Rev. 2 →

Even with LCA (sparse table) you can solve it with O(NsqrtN), just SQRT-decomposition.

→ Reply

Petr

11 years ago, # ^ |

Not sure I understand your comment. What does "Even with LCA" mean? My point was that LCA is a data structure.

→ Reply

izban

11 years ago, # ^ |

Okay, I misunderstood you.

→ Reply

11 years ago, # ^ |

Every $\text{[math]}$ queries perform DFS on a full tree. Also we can build a tree "stretched" on the $\text{[math]}$ next vertices and find distances between every pair of them in O(Q).

→ Reply

Petr

11 years ago, # ^ |

Nice usage of the fact that the problem is offline, thanks!

→ Reply

11 years ago, # ^ |

...which is just a disguised Aho-Hopcroft for processing $\text{[math]}$ LCA queries. =)

→ Reply

11 years ago, # ^ |

-8

I know only Tarjan's algo for answering M offline LCA queries in O(N + M). Is there any other approach?

→ Reply

11 years ago, # ^ |

I believe that's the same approach. Quite a lot of different names are used for it.

→ Reply

yeputons

11 years ago, # ^ |

Rubanenko, you forgot about the inverse Ackermann's function.

→ Reply

See http://mirror.codeforces.com/blog/entry/2381

11 years ago, # ^ |

Do you remember that DSU has actually unproven complexity? There was an error in original proof.

→ Reply

11 years ago, # ^ |

-11

Who ever cares about Ackermann's inverse? :)

→ Reply

yeputons

11 years ago, # ^ |

'Actually'? There is just a list of another articles that assumes original paper contained some mistakes. And some of these articles were wrong by themselves. So, I'd better not claim that the original complexity is 'unproven' or 'wrong'.

In any case, there is a rather simple iterative logarithm upper bound, which is missing too.

→ Reply

11 years ago, # ^ |

-17

Oh, well, without advanced data structures :)

→ Reply

Edvard

10 years ago, # ^ |

← Rev. 2 →

Here is my solution. Answer to each query of type 2 is: depth[v] * number_of_blue_vertexes + sum_of_depths_of_blue_vertexes — 2 * sum_of_all_lca_from_v.

Let's calc last sum. Denote v = p0, p1, p2 ... root = Pk the path from v to root. So for every pi we should add depth[pi] * (cnt[pi]-cnt[p_i+1]) to the sum. But depth[pi]=w_pi+w_p_i-1+...+w_p1. If we disclose brackets, regroup elements and simplify the expression, we get: sum = sum by all i from 1 to k of weight of edge from pi to its parent * cnt of blue elements in subtree of pi.

So solution is this:

1 type of query. inc all vertexes from v to root by 1.

2 type. Calc the sum from v to root weighted with weight,of edges to parent.

We can do that in n log^2n time with hld, or in n logn time with linkcut tree.

→ Reply

11 years ago, # ^ |

It can be solved in O(N * log(N)) without any data structures using divide-and-conquer on a tree, provided that you sort numbers between 1 and N in O(N)

→ Reply

11 years ago, # ^ |

The intended solution (in fact my solution) was O(N log N): - First pre-process the tree and divide it in its centers. - For each query of type update, traverse centers until you reach a center equals to query's node, just update its value and recursively update it's predecessors. - For each query of type get, traverse centers suming up for each subtree that doesn't contain the query's node its pre-calculated value, recursively go down until you reach the correct node and just return the result.

As ivan came up with a different and very nice solution O(N sqrt N) we decided to let both of them get accepted.

→ Reply

PavelKunyavskiy

11 years ago, # ^ |

I send NlogN using Link-Cut tree. But I don't think problem, which alows to solve quite easy, it you have prewritten structure is good.

→ Reply

KADR

11 years ago, # ^ |

← Rev. 2 →

<troll mode>
If it allowed "quite easy" solution with pre-written structure, your score for this problem would be 700+ :)
</troll mode>

→ Reply

11 years ago, # ^ |

-8

But with TC, 700+ means instant solution; it could've been easy as in the rest of the solution is easy to think up, but still takes a while to write.

Countertroll!

→ Reply

KADR

11 years ago, # ^ |

Look at PavelKunyavskiy solution, the amount of code not related to link-cut-tree implementation is very small. And one must spend more than 20 minutes on problem to get 700 points for 1000-ptr.

Actually, I also have a pre-written implementation of link-cut-tree, but I decided that I'll spend much more time on modifying it and debugging the solution than on coming up with some simpler idea.

→ Reply

11 years ago, # ^ |

-24

20 minutes isn't much...

Sure, why not. As I said: countertroll — not a very serious response to another not very serious post :D

→ Reply

DmitriyH

11 years ago, # |

Today a new restrictions come: n <= 4000, n <= 2000
Max tests have given three successful challenges to me :)

→ Reply

zeulb

11 years ago, # |

+30

Modulo on my template

int MOD    = 1000000007;

Modulo on the main code (the correct one)

LL mod = 1000000009;

Modulo on calculation

if (ways[v] >= MOD) ways[v]-=MOD;

gonna remove modulo from my template :( and perhaps my shift key from my keyboard...

→ Reply

nic11

11 years ago, # ^ |

-16

Good luck with

if (A && B)

→ Reply

HandIeNeeded

11 years ago, # ^ |

Me too. That was not fun!

→ Reply

11 years ago, # ^ |

-8

precisely the reason why i removed #define MOD 1000000007 from my template! :D

→ Reply

SmartCoder

11 years ago, # ^ |

450pt of Petr also get successful challenge due to the same problem

→ Reply

I_love_tigersugar

11 years ago, # |

+18

The pretests was very very weak :(

P/s: Can anyone tell me how to enter a 2000-element vector to challenge?

→ Reply

udalov

11 years ago, # ^ |

-8

Input "1,2,3,4,5,..." in the text field and press "++"

→ Reply

11 years ago, # ^ |

-8

There's "++": "enter comma delimited array". You can make one with 2000 elements by making one with 2 elements, and (copy-pasting 9x) 3x. This is what I found out today :D

→ Reply

SmartCoder

11 years ago, # ^ |

-8

{1,2,3,4,.....,4000}
then press {}

→ Reply

HandIeNeeded

11 years ago, # ^ |

-8

LINK

→ Reply

DmitriyH

11 years ago, # ^ |

-8

{1,2,3,4,5,...,4000} and press {}

→ Reply

yeputons

11 years ago, # |

+24

What is stack size for GCC on TopCoder? I think that I've got stack overflow in my 1000 on the server, is that possible?

→ Reply

I_love_tigersugar

11 years ago, # ^ |

I think the stack size is standard (2-4 MB), unlike Codeforces.

→ Reply

Gassa

11 years ago, # ^ |

Seems that the stack limit recently dropped. When memory limit was 64 mebibytes, stack limit for C++ was about the same. Now, it is more like 8 mebibytes, don't know exactly.

→ Reply

11 years ago, # ^ |

I also have this feeling about my 1000.

→ Reply

11 years ago, # |

← Rev. 2 →

+16

Just when my rating is 2182 and I expect to be red tonight, I got MOD problem :'(((((

→ Reply

11 years ago, # ^ |

-8

Sorry for that, we didn't even noticed that sample cases were not covering MOD overflow.

→ Reply

11 years ago, # ^ |

-10

Apology accepted. But still you owe me huge amount of rating.... :'(

→ Reply

11 years ago, # |

looks like i will go down from yellow to blue today.
maybe this is a sign that i should stop supporting Brazil and support Italy or France for the World Cup! :P

→ Reply

11 years ago, # ^ |

← Rev. 2 →

You are Juan Mata, you should support Spain then :P

(for non-football fan : Juan Mata is a spanish football player)

→ Reply

11 years ago, # ^ |

unfortunately though, i don't think Mata will start tomorrow's match against Holland :(

→ Reply

I_love_tigersugar

11 years ago, # ^ |

I want to support Germany (white), so I should register a new account and make it unrated :(

P/s: All TC admins support Netherlands :))

→ Reply

mexmans

11 years ago, # |

-7

System testing is so slow =(

→ Reply

oversolver

11 years ago, # ^ |

N<=4000, n<=2000, n<=100000.

→ Reply

11 years ago, # ^ |

not even 50% finished :'(

→ Reply

11 years ago, # ^ |

Yeah, seems like we're up for a 2-hour systest...

→ Reply

11 years ago, # ^ |

I wonder why they don't show current standings? Some time ago we could see live systests, didn't we?

→ Reply

KADR

11 years ago, # ^ |

+17

Nope, the results are always being opened room by room after system testing is over.

→ Reply

11 years ago, # ^ |

Thanks) Seems I thought this room by room showing is systest itself >.<

→ Reply

11 years ago, # ^ |

perhaps the server is too busy preparing for the World Cup :D

→ Reply

zholnin

11 years ago, # |

← Rev. 3 →

Wanted to ask — why problemsetters in Topcoder use "generating functions" for inputs? I can understand that happening in Codeforces (where reading from file can cost too much in some languages) or in GCJ, where time required to download inputs is deducted from total time given for one attempt.

I am not so sure about SRMs. Parameters are passed to the function. If you pass then by reference, there is no time overhead. I think all languages at Topcoder can do passing by reference (at least I am sure about C++ and Python, should be the same for Java). Also you had this statement saying that "the way it was generated doesn't have any relation to the way it should be solved", which presumes that it was just a technical step.

So what prevents from passing input as it is, without those generating functions?

→ Reply

ffao

11 years ago, # ^ |

TopCoder's system. If you have an input of length more than ~2000, it crashes for some reason.

→ Reply

zholnin

11 years ago, # ^ |

← Rev. 5 →

+14

Thanks!

Maybe some kind of limitation on how much database memory you can spend for holding testcases for specific problem. I forgot that they also have to keep all testcases indefinitely (potentially), so they probably don't want to have hundreds of 50Mb testcases for each problem.

UPDATE1: On another thought — Topcoder could keep this "generating function" in database and create input whenever it is needed for testing, so this is non-issue. The only issue is that it is not supported by current platform. But I think it is definitely good feature request.

UPDATE2: Generally I can see pattern

posts with bad ideas get lots of minuses and
posts about somebody's struggles with problems if they don't end up in good question or in good answer get lots of minuses. There is exemption for red rated though.

But I don't understand minuses for this question — whoever wants to put another minus please tell why do you think that this is bad idea.

→ Reply