azneyes's blog

2017 Facebook Hacker Cup Round 2
By azneyes, history, 8 years ago, In English

Hello Codeforces,

FHC 2017 Round 2 will take place soon: Jan 21, 2017 10:00 AM PST

The contest will last 3 hours. Time penalty counts!

Top 200 will advance to Round 3.

Top 500 will get T-shirts!

I will post the contest link here closer to the start time.

Good luck everyone.

UPD: contest link

  • Vote: I like it
  • +92
  • Vote: I do not like it

Comments Comments (76)
| Write comment?
»
8 years ago, # |
  Vote: I like it -10 Vote: I do not like it

Contest starts at 1 am here. RIP ranking :(

→ Reply
  • »
    »
    8 years ago, # ^ |
      Vote: I like it +2 Vote: I do not like it

    Contest starts 2am here, I am happy even if I can only get a t-shirt.

    → Reply
    • »
      »
      »
      8 years ago, # ^ |
        Vote: I like it +32 Vote: I do not like it

      Contest starts at 3am here. Is there anybody from east Australia, east Russia, or New Zealand?

      → Reply
      • »
        »
        »
        »
        8 years ago, # ^ |
        ← Rev. 2   Vote: I like it +12 Vote: I do not like it

        Hello, I enjoyed my 5am morning in Australia.

        → Reply
»
8 years ago, # |
  Vote: I like it +18 Vote: I do not like it

It begin at Jan 21, not Jan 20. You almost give me a heart attack, I think I miss the round :p

→ Reply
  • »
    »
    8 years ago, # ^ |
      Vote: I like it 0 Vote: I do not like it

    Oh sorry for scaring you. Fixed the date.

    → Reply
»
8 years ago, # |
  Vote: I like it +16 Vote: I do not like it

Contest Link : https://www.facebook.com/hackercup/round/742957399195355/

→ Reply
»
8 years ago, # |
  Vote: I like it +3 Vote: I do not like it

How hard is it to win a TShirt? This is my first HackerCup. I could score only 35 in round 1 :(

→ Reply
  • »
    »
    8 years ago, # ^ |
      Vote: I like it 0 Vote: I do not like it

    this is my first round 2 as well! (Previous year I failed round 1).

    considering a heavy participation(from entire world) I think getting into top 500 is difficult for a blue rated programmer like me!

    → Reply
  • »
    »
    8 years ago, # ^ |
      Vote: I like it +38 Vote: I do not like it

    About 2400 people qualified for Round 2, and I would guess that fewer than 2000 will compete. So you'll need to be in the top 25% or so. Good luck!

    → Reply
»
8 years ago, # |
  Vote: I like it +2 Vote: I do not like it

I'm in a really weird situation. I have a solution for C, which gives expected answers on the first 4 samples, but a different one on the last sample; the same happens for a bruteforce. I've read the code and the problem about a million times and can't see anything wrong. Since tests are generated, the samples are quite strong, but making any tests I want is... hard.

I don't see any better strategy than giving up.

→ Reply
  • »
    »
    8 years ago, # ^ |
    ← Rev. 3   Vote: I like it +9 Vote: I do not like it

    I know it's not a good practice to discuss questions of ongoing rounds, but damn... I have been sitting in front of my monitor for 45 minutes and I still can't understand the statement.

    Literally me after understanding the statement.

    → Reply
  • »
    »
    8 years ago, # ^ |
      Vote: I like it +15 Vote: I do not like it

    I had same experience but with B :|

    I spent > 1.5 hours writing both good solution + brute force for B. Both gave same result and wrong on last 2 tests. After reading code 1000 times I switched to A + C.

    → Reply
    • »
      »
      »
      8 years ago, # ^ |
      ← Rev. 2   Vote: I like it +10 Vote: I do not like it

      I had the exactly same problem. I spent my last 1.5 hours on B even though I had the idea for D, but it initially thought the code would be easier. B was really annoying... C and D though

      → Reply
  • »
    »
    8 years ago, # ^ |
      Vote: I like it 0 Vote: I do not like it

    What was C's solution?

    My failed solution was n logn^2, using segment tree, that we can merge 2 ranges [l1, r1] and [l2, r2] as
    ans[l1, r2] = ans[l1, r1] * ans[l2, r2] + ans[l1, r1 — 1] * ans[l2 + 1, r2] * M[r1][front] * M[l2][back],
    where M stores number of mappings uptil now in that given direction, with base case as ans[x, x] = M[x][same]

    → Reply
    • »
      »
      »
      8 years ago, # ^ |
        Vote: I like it +44 Vote: I do not like it

      You can solve it in NlogN with a segtree storing the following information:
      Answer , Answer without last element , Answer without first element , Answer without first as well as last element.

      → Reply
    • »
      »
      »
      8 years ago, # ^ |
        Vote: I like it 0 Vote: I do not like it

      This is my solution: http://ideone.com/Wdrr2g
      Though untested, since I could not debug it on example cases(1 char mistake :( ) — the logic is exactly same to most of accepted solutions — you keep 4 things in segtree nodes, matchings in [l+1,r] in [l+1,r-1], [l,r-1] and [l,r] in [l,r] . just see the merge function its the whole solution..

      → Reply
    • »
      »
      »
      8 years ago, # ^ |
        Vote: I like it +8 Vote: I do not like it

      The key observation is that there're only two ways to match two adjacent pairs: the edges are either parallel or they cross each other (it looks either like two parallel lines or as an X letter).

      Let's store f(is left open, is open right) in each node of the segment tree (it denotes the number of ways to match everything inside the segment so that the state of the left and the right border corresponds to the boolean parameters (it's true if and only if the edge goes across)). We can merge two nodes by iterating over all possible parameters' values for the left and for the right node (in fact, there're 8 valid combinations as the middle ones must match).

      The time complexity of this solution is O(N log N).

      → Reply
      • »
        »
        »
        »
        8 years ago, # ^ |
          Vote: I like it 0 Vote: I do not like it

        Yeah, could one of you guys share your accepted code, since I implemented the same idea, got WA, logN times higher complexity though.

        → Reply
        • »
          »
          »
          »
          »
          8 years ago, # ^ |
            Vote: I like it +6 Vote: I do not like it

          My solution.

          By the way, you can download everyone's code by clicking the source link in the scoreboard.

          → Reply
»
8 years ago, # |
  Vote: I like it -6 Vote: I do not like it

Please somebody in 30 minutes explain what was the catch with problem B, where I am absolutely sure that my solution for test example 4 is correct (I even had enough time to draw the picture) and the number is smaller then official answer (they are asking for minimum, so). I tried to do it with two different methods (including brute force) and got same answer. Must be something in problem statement which is not obvious, but I did read it many many times...

I resign at this point. After competitions ends I can post my answer to example 4.

→ Reply
  • »
    »
    8 years ago, # ^ |
      Vote: I like it +21 Vote: I do not like it

    Did you just say "brute force" for a problem with geometric statement? How?

    → Reply
    • »
      »
      »
      8 years ago, # ^ |
        Vote: I like it 0 Vote: I do not like it

      Aren't all angles were 45 degrees if you wanted to achieve minimal cross section? Meaning from every pole it was going down at 45 degrees both left and right unless some other pole prevented it from happening?

      I just multiplied height and position by 2 and did everything even in integer numbers.

      Are there cases where something else then 45 degrees gives optimal solution? if this is the case then this must be my error in understanding the problem statement.

      → Reply
      • »
        »
        »
        »
        8 years ago, # ^ |
          Vote: I like it 0 Vote: I do not like it

        Indeed, it's always 45 degrees. Do you check that the height of the tent is always non-negative?

        → Reply
    • »
      »
      »
      8 years ago, # ^ |
        Vote: I like it 0 Vote: I do not like it

      It's more like data structures, and not really a geometry :)

      Don't know about zholnin, but I simply split each 1x1 cell in 4 parts by 2 diagonals, and after that putting a pole is equal to labeling some of these triangles as used.

      → Reply
  • »
    »
    8 years ago, # ^ |
    ← Rev. 2   Vote: I like it +39 Vote: I do not like it

    Aren't you forgetting to add current area to the answer when it doesn't increase? Cause that's what happened to me on test 4 and it took more than 30 minutes to find.

    → Reply
    • »
      »
      »
      8 years ago, # ^ |
      ← Rev. 2   Vote: I like it 0 Vote: I do not like it

      It would be very helpful if you can give me current area + sum of current areas after each pole. I have this:

      49.000000 49.000000
2549.000000 2500.000000
6050.000000 3501.000000
12386.000000 6336.000000
19046.000000 6660.000000
25742.000000 6696.000000
32678.000000 6936.000000
39694.000000 7016.000000
47058.000000 7364.000000

Case #4: 47058.000000

      And this is the answer at the bottom.

      → Reply
      • »
        »
        »
        »
        8 years ago, # ^ |
        ← Rev. 2   Vote: I like it +18 Vote: I do not like it

        You have exact same result as me. And my reason was because of what Vercingetorix said.

        Note that you print only 9 lines while N = 13.

        → Reply
        • »
          »
          »
          »
          »
          8 years ago, # ^ |
            Vote: I like it 0 Vote: I do not like it

          Yeah, it was very stupid. I see now. There should be 13 lines in my output not 9.

          → Reply
      • »
        »
        »
        »
        8 years ago, # ^ |
          Vote: I like it 0 Vote: I do not like it 
        49
2500
3501
6336
6336
6660
6696
6936
6936
6936
7016
7364
7364

74630

        Seems like Vercingetorix was right

        → Reply
»
8 years ago, # |
  Vote: I like it +18 Vote: I do not like it

Fighting all the Zombies is similar to http://mirror.codeforces.com/contest/573/problem/D.

→ Reply
»
8 years ago, # |
  Vote: I like it 0 Vote: I do not like it

Now that it is over, what was the solution for Q1 ? Couldn't find a pattern.

→ Reply
  • »
    »
    8 years ago, # ^ |
      Vote: I like it +30 Vote: I do not like it


    these are the only possible cases , also swap n , m once and try it once again

    → Reply
    • »
      »
      »
      8 years ago, # ^ |
        Vote: I like it 0 Vote: I do not like it

      I had the same idea but I only used (n,m) as (max, min) ... Now I think about it that was very stupid.

      → Reply
»
8 years ago, # |
  Vote: I like it +43 Vote: I do not like it

Placed 500th, what a luck.

→ Reply
»
8 years ago, # |
  Vote: I like it +18 Vote: I do not like it

What can be more awesome than passing all samples on B and it output negative numbers in all the test cases !

→ Reply
  • »
    »
    8 years ago, # ^ |
      Vote: I like it +56 Vote: I do not like it

    Got the same but managed to debug it in 4 minutes and finally grab my AC.

    → Reply
»
8 years ago, # |
  Vote: I like it +23 Vote: I do not like it

Spending all 3 hours on the last problem is the best strategy, isn't it?

→ Reply
  • »
    »
    8 years ago, # ^ |
      Vote: I like it 0 Vote: I do not like it

    Indeed, was 15 minutes before being able to finish D (though maybe simpler solutions exist).

    → Reply
»
8 years ago, # |
  Vote: I like it +83 Vote: I do not like it

I wrote naive solution in problem B to stress test my solution and it generated all answers in 4 minutes. Very weak tests again.

→ Reply
  • »
    »
    8 years ago, # ^ |
      Vote: I like it +40 Vote: I do not like it

    The testdata of pC does not include the case "n = 1". I believe somebody would fail on that. Hope that round 3 would have stronger testdata :P

    → Reply
  • »
    »
    8 years ago, # ^ |
    ← Rev. 2   Vote: I like it -15 Vote: I do not like it

    Lucky you, my naive solution for B worked for around 8 minutes, mind sending me your T-shirt? :D

    Also, I think problem A required way too much rigorous drawing on paper and too many if-elses even though some people came up with somewhat concise solutions. I didn't like it at all.

    → Reply
»
8 years ago, # |
  Vote: I like it 0 Vote: I do not like it

Just 1 char change in problem 3 code and could have been selected to next round :( — Was initializing all matchings in segtree nodes to 1, while half matching should be 0...

→ Reply
  • »
    »
    8 years ago, # ^ |
      Vote: I like it -10 Vote: I do not like it

    I also initialised all matchings to 1 and failed system tests but can't find any error.

    What is half matching? Did you pass the pretests?

    → Reply
    • »
      »
      »
      8 years ago, # ^ |
      ← Rev. 4   Vote: I like it 0 Vote: I do not like it

      I could not debug it on example cases — had 10 minutes left when i started to debug it the hard way. you keep matchings in [l+1,r], [l,r-1], [l+1,r-1], and [l,r]. Base cases of all others are 1 except [l+1,r-1] — its 0. Code — http://ideone.com/Wdrr2g
      Edit — It matches the input/output with accepted solutions :(

      → Reply
»
8 years ago, # |
  Vote: I like it +146 Vote: I do not like it

I don't like problems like A in important contests without full feedback. It make things more random. Or maybe were we expected to write some exponential solution to check the correctness?

Problems B and C were so boring IMO, they're only about the implementation. It's sad that those problems were most important for choosing who passes.

Though, I liked the last problem.

→ Reply
  • »
    »
    8 years ago, # ^ |
      Vote: I like it +85 Vote: I do not like it

    I disagree with you on D. A very routine problem with all the standard algebra tricks rather than clever algorithmic insight. Probably would favor someone with strong arithmetic library.

    That being said, C is quite an interesting problem if you haven't seen it before.

    → Reply
    • »
      »
      »
      8 years ago, # ^ |
        Vote: I like it 0 Vote: I do not like it

      Finding the area of building and clouds were standard for me but I couldn't find a way to compute the area of water, at least during the contest — this is why I liked it. Maybe I missed something and it's standard indeed.

      For me C was yet another segment tree problem with complicated merging. It's so known that I used a similar problem on a CF round before (573D - Bear and Cavalry), but that one required some thinking first and otherwise I likely wouldn't use it at all.

      → Reply
      • »
        »
        »
        »
        8 years ago, # ^ |
        ← Rev. 2   Vote: I like it +10 Vote: I do not like it

        Well, If I say that area of water is (area of cells below cloud) — (area of grey cells below cloud), will it make it standard?

        → Reply
        • »
          »
          »
          »
          »
          8 years ago, # ^ |
            Vote: I like it 0 Vote: I do not like it

          I made this observation in first seconds and assumed that I must use it. Still, I couldn't find the sum of grey area under clouds.

          → Reply
          • »
            »
            »
            »
            »
            »
            8 years ago, # ^ |
            ← Rev. 3   Vote: I like it 0 Vote: I do not like it

            After reading your comments, I just figured out that water area = total area — all other areas.
            Never mind, it doesn't help)

            → Reply
          • »
            »
            »
            »
            »
            »
            8 years ago, # ^ |
              Vote: I like it +3 Vote: I do not like it

            It's interesting to see how different people find different observation difficult. I didn't see this fact for a long time, but after I understood it, I understood everything.

            Anyway sketch of what I did:

            1. I searched for the highest grey tower, solved for clouds that are above it, and solved recursively for left and right. (That's probably common part for everything similar)
            2. Now we want to calculate grey area under clouds that are above highest tower:

            index — position of highest tower
            h — its height
            l — start of segment(inclusively)
            r — end of segment(exclusively)
            L = index - l
            R = r - index - 1

            First of all there's ways to choose rows for it, will multiply everything by it.

            Tower at position x will be counted (L + 1)(R + 1) times, so adds H(L + 1)(R + 1) to answer

            Let's check how much will tower at position l ≤ x < index give. It's hx(R + 1)(x - l + 1) (we choose left border to the left of x and right border to the right of index). We need to sum that for all x from l to index and we need only prefixsums for hx and for hx·x

            → Reply
      • »
        »
        »
        »
        8 years ago, # ^ |
        ← Rev. 3   Vote: I like it +3 Vote: I do not like it

        Okay, here's my take for D. I will only focus on calculating the blue parts, please comment if you prefer a complete solution.

        Let W[i] = n - H[i] be the number of non grey squares on column i.

        Let L[i] be the smallest index such that W[x] > W[i] for L[i] ≤ x ≤ i, and let R[i] be the largest index such that W[x] ≥ W[i] for i ≤ x ≤ R[i].

        Fix an index i and let L = L[i], R = R[i], W = W[i], the blue part corresponding to column i is equal to

        (there are w ways choosing a rectangle that leaves only S[k] - w blue squares remaining)

        Collecting the term associated with w we get

        . so it suffices to calculate the sum

        . The trick here is to split the range of k into $L \le k \le i - 1$ and i ≤ k ≤ R. On L ≤ k ≤ i - 1, the coefficient associated with S[k] is (R - i + 1) × (k - i + 1), so it suffices to precompute the prefix sum . On i ≤ k ≤ R, the coefficient associated with S[k] is (i - L + 1) × (R - k + 1), so it suffices to precompute the suffix sum . The rest is algebraic manipulation.

        → Reply
      • »
        »
        »
        »
        8 years ago, # ^ |
          Vote: I like it +76 Vote: I do not like it

        Was merging in C complicated? If we model each node as an 2x2 matrix, the problem just boils down to matrix update / matrix product calculation. There was nothing to implement besides segment tree (which is easy)

        I think figuring out a right model was the only important thing in problem C, and that's why I liked that problem. I didn't knew your problem, so I also found it fresh. but seems like I'm wrong for it..

        I agree to your point about the rest of the problems. For D, I thought it was simply too tedious, but I couldn't solve it anyway and some might disagree for it..

        → Reply
  • »
    »
    8 years ago, # ^ |
      Vote: I like it +18 Vote: I do not like it

    That awkward moment when somebody says "B and C are just a boring implementation" and I have spend like 50 minutes trying to figure out how the hell that problem B should be solved before coming up with something meaningful :)

    I completely agree with your point of view on A, now I'm even surprised that it doesn't contain some more tricky cases — during a round it was "let's submit it, in case there are some tricky cases I'll not find them anyway" for me. And prior to that it was "this is what I have to solve for 12 points, I don't even want to think what to expect from other problems".

    → Reply
  • »
    »
    8 years ago, # ^ |
      Vote: I like it +30 Vote: I do not like it

    I'd put it this way: "without full feedback" plus "time penalty" is relatively bad. Remove one and you get either old-fashioned IOI or ACM ICPC.

    → Reply
»
8 years ago, # |
  Vote: I like it +165 Vote: I do not like it

The quality of problems was pretty bad in my opinion.

Problem A is OK if you can get the feedback like in ACM ICPC style, otherwise it is just about luck B and C were just so standard and implementation heavy that I don't really want to compete anymore

I understand that this is early qualification round and they don't waste good problems but for example, Google Code Jam has much better problems at this stage.

→ Reply
  • »
    »
    8 years ago, # ^ |
      Vote: I like it +40 Vote: I do not like it

    We wrote the same thing and posted it in the same minute. Nice.

    → Reply
    • »
      »
      »
      8 years ago, # ^ |
        Vote: I like it +3 Vote: I do not like it

      Yeah looks like one of us wasted time :)

      At least I saved some time by not competing in the last hour.

      → Reply
»
8 years ago, # |
  Vote: I like it +18 Vote: I do not like it

I got an achievement: "For two years in a row in R2 submit a source code that produces correct answer in short time, but somehow still submit wrong output".

Last year it was in most important problem and costed me qualifying to R3, however luckily this year it was in easiest problem, so it didn't cause a big harm. Last year my mistake was pretty pathetic, but I can't explain what happened this year. Maybe I didn't compile code after changing it or whatever, no idea.

→ Reply
»
8 years ago, # |
  Vote: I like it 0 Vote: I do not like it

Failed the 3rd one since the tests were so that it didn't touch one of the combination cases.

At least I learned that even if it's a big and random test, it might still be an evil random test :(.

→ Reply
»
8 years ago, # |
  Vote: I like it +1 Vote: I do not like it

How to solve B properly?

→ Reply
»
8 years ago, # |
  Vote: I like it +31 Vote: I do not like it

Does anyone have a proof for A? I've spent one and a half hours before giving up. It's so frustrating.

→ Reply
»
8 years ago, # |
  Vote: I like it +27 Vote: I do not like it

Honestly I didn't like the problems but at least Let's hope the tshirt color will be better than the last two years :P

→ Reply
  • »
    »
    8 years ago, # ^ |
      Vote: I like it +16 Vote: I do not like it

    Can you share pictures of last two years' t-shirts?

    → Reply
    • »
      »
      »
      8 years ago, # ^ |
        Vote: I like it +18 Vote: I do not like it

      The red one is 2014's and the other is 2015's. The 2016's one had the same design but the color was pale grey. The worst thing is the writings on the back they write lots of stuff with large fonts.

      → Reply
      • »
        »
        »
        »
        8 years ago, # ^ |
          Vote: I like it +18 Vote: I do not like it

        The most awkward thing about their last year T-Shirts is that their color scheme is almost 'white text on the white background". After a few washes, the background and the text become indistinguishable :)

        → Reply
  • »
    »
    8 years ago, # ^ |
      Vote: I like it -23 Vote: I do not like it

    I also hope there won't be print "Hello, world!" ...

    → Reply
    • »
      »
      »
      8 years ago, # ^ |
        Vote: I like it +9 Vote: I do not like it

      This is on codejam tshirt :P FBHC writes something like "Code fast and win things" with a link to their facebook page on the tshirt -_-

      → Reply
»
8 years ago, # |
  Vote: I like it 0 Vote: I do not like it

In problem B, if I have pole of height 10 at 0 and pole of height 3 at 100. Suggested solution is iterating all and adding areas — 100 + 109 = 209. But it's not optimal, optimal is 9 + 109 + 118. What am I missing?

→ Reply
  • »
    »
    8 years ago, # ^ |
      Vote: I like it +11 Vote: I do not like it

    You don't get to choose the order. The poles appear one by one in the order in which they are given in the input.

    → Reply
»
8 years ago, # |
  Vote: I like it +22 Vote: I do not like it

Should we have received a t-shirt by now or have they not been sent out?

→ Reply
»
7 years ago, # |
  Vote: I like it +16 Vote: I do not like it

anybody got their t-shirts yet?

→ Reply